Hi Tom:

tried your suggestion as best i understood it, and it returned nothing at
all?!?!? What do I try now?

I'm actually going to uninstall my win modem and try that. I use a DSL so I
don't need the hardware anyway. I'll also let you know if that helps.

Karekin




On Tue, 07 Mar 2000, Tom Berger wrote:
> On 07-Mar-2000 Karekin Madteos wrote:
> > 
> > Tom:
> > 
> > Thanks.  modprobe sgalaxy.o gives me the same message...device or 
> > resource busy.
> > 
> > A look at my /etc/conf.modules gives me the following:
> > 
> > 
> > alias eth0 3c59x
> > alias parport_lowlevel parport_pc
> > pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
> > alias sound sb
> > pre-install sound insmod sound dmabuf=1
> > options opl3 io=0x388
> > alias midi awe_wave
> > post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2
> > options sb io=0x260 irq=10 dma=1 dma16=0 mpu_io=0x300
> > 
> > Any ideas?
> > 
> > Karekin
> 
> 
> Run
> 
> /sbin/fuser -v /dev/dsp
> 
> as 'root'.
> 
> What does that say?
> 
> Explanation:
> 
> "fuser displays the PIDs of processes using  the  specified
> files  or file systems." (man fuser)
> 
> tom
> 
> > On Tue, 07 Mar 2000, Tom Berger wrote:
> >> On 07-Mar-2000 Karekin Madteos wrote:
> >> > Thanks Piero:
> >> > 
> >> > Unfortunately, I get the same error with PnP disabled. In addition I get a
> >> > hardware conflict error at boot up. It iwll let me Esc and boot anyway but
> >> > so
> >> > vhange in the status of the original problem.
> >> > 
> >> > Any suggestions?
> >> > 
> >> > Karekin
> >> 
> >> 1) What does 
> >> 
> >> modprobe sgalaxy.o
> >> 
> >> say?
> >> 
> >> 2) Have a look at /etc/conf.modules, is there already an entry for 'sound'?
> >> 
> >> Regards
> >> 
> >> tom
> >> 
> >>  
> >> > On Mon, 06 Mar 2000, Piero Caracciolo wrote:
> >> >> At 13:19 05/03/00 -0500, you wrote:
> >> >> >I finally got mandrake installed and everything seems ok except now I'm
> >> >> >having minor hardware problems. I ran sndconfig to try to configure my
> >> >> >SoundBlaster 16 but it detected my AZT PnP modem instead of the SB card.
> >> >> >It
> >> >> >then desplays the following error:
> >> >> >
> >> >> >/lib/modules/2.2.14-15mdk/sgalaxy. o: init_module: device resource busy.
> >> >> >
> >> >> >
> >> >> >
> >> >> 
> >> >> May be what I'going to say is too naive: did you disable the PnP-system
> >> >> feature in the Bios (as you should have done)? With me, this solved many
> >> >> problems.
> >> >> Piero Caracciolo
> >> >> 54, rue de Bourgogne
> >> >> 75007 Paris - France
> >> 
> >> -- 
> >> "No fun, no gain"
> >> Thomas 'tom' Berger, [EMAIL PROTECTED] (home), [EMAIL PROTECTED] (work)
> >> http://www.mandrakeuser.org, [EMAIL PROTECTED]
> 
> -- 
> "No fun, no gain"
> Thomas 'tom' Berger, [EMAIL PROTECTED] (home), [EMAIL PROTECTED] (work)
> http://www.mandrakeuser.org, [EMAIL PROTECTED]

Reply via email to