Thanks Didier for the reply
I tried the modprobe, no luck, so I reinstalled. This time just entered
0140,10,7,1 at the SCSI setup option. (the install book not clear here)
Only other problem was that I needed to edit /etc/fstab to change the /mnt/zip
from the vfat automatically set up to ext2 for linux.. I can access zip disk OK.
Another question tho - there doesnt seem to be any way with this system
to mount the zip drive on the desktop by right-clicking the zip icon.
There seems to be only one icon showing, for either a mounted or unmounted zip
drive.
I edited /etc/fstab to make the zip and floppy drives noauto for mounting.
Bill
> > Hello, > > I have an adaptec aha152b. It work fine with these
settings > > aha152x=0x340,11,7,1 > > (IO base, DMA, SCSI ID, parity)
> > Try
> > modprobe aha152x aha152x=0x340,11,7,1 [set the values according to your
> > system]
> > Then, if it works, enter the line in rc.local
> >
> > OR
> > Reinstall (update) and enter the settings when asked.
> > I hope this will be helpful.
> > Didier
> >
> > -----Message d'origine-----
> > De : William Fisher [mailto:[EMAIL PROTECTED]]
> > Envoye : jeudi 29 juin 2000 01:46
> > A : [EMAIL PROTECTED]
> > Objet : Re: [newbie] adaptec scsi aha152x
> >
> > My SCSI card was not recognized on the install of Man 7.0
> > It works on Win98 and on Caldera 2.2
> > It's adaptec AHA-150x/1510/152x/AIC-6x60
> > I tried entering the io=0x140 irq=10 after the auto recognition failed, but
> > no luck there.
> > Also, the install book doesnt seem to indicate how to set up SCSI later
> > if I do complete the rest of the installation.
> >
> > Suggestions appreciated.
> >
> > Bill
> >
> >
> > ______________________________________________________________________________
> > message envoye depuis http://www.ifrance.com
> > emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums
> > Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement)
>
> --
>
> Joe St.Clair - KSI Machine & Engineering
