actually, a tv doesn't have resution or color death. Its analog, it has only
x resution and unlimited color deaph.
----- Original Message -----
From: Tom Brinkman <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, August 05, 2000 2:19 PM
Subject: Re: [newbie] Refresh rates / Screen quiver
On Wed, 02 Aug 2000, you wrote:
> I have heard through the grape vine that the refresh rates can sometimes
> be off by 1Hz or so. Try your refresh rates and make sure they are set
> correctly. You may have to go into the X config file, I am not sure how
> to change it. I am trying to work this out myself.
>
> And I thought monitors were meant to protect themselves from incorrect
> refresh rates.
>
> Any ideas people?
Many monitor manufacturers overstate their product specs, and
'Hz' are always � Damn near all the time, even junk monitors will
do 1280x... @ 60Hz (17" >), so that's usually a good choice if
you're not sure, or your monitor doesn't wanna run X at specs.
Windoze hardly ever has a problem with monitors, since no matter
what you choose as the monitor manufacturer or model, you'll either
get monitor.inf, or monitor2.inf, both of which under-drive most
all monitors (and video cards).
No matter what OS your monitor is used with, it will never run
at 'full speed' unless your video card and ram/cpu/cache/motherboard
are up to the task. If all that is in good shape, many quality
monitors can be over-driven with very little risk, ~ +10 to 15%
Whatever, depending on the back lighting (fluorescent is the
worst), refresh rates below ~70 will usually produce flicker. TV's
are 60Hz, yet flicker is rarely noticed. That's 'cause resolution
and depth are _low_. If you feel your getting flicker with the
proper settings, try a lower resolution and/or color depth, run your
monitor above spec, or both. If you then hear a high pitched squeal
coming from the back of the monitor... buy better hardware ;->
--
~~ Tom Brinkman [EMAIL PROTECTED]
