On Monday 25 December 2000 16:04, you wrote: > Please can anyone on this list help. > > System: > > Mb: asus cusl2 > Ethernet cards: LNE100tx, old card that used to work under 7.0 w/ tulip > drivers > OS: mandrake 7.2 I'm using a Linksys LNE 100TX version 4.1 All I did was in the network setup choose eth0, then couple lines down go with the tulip driver. Didn't add or compile any other drivers just the stock setup. My log below from my LNE 100TX Linksys card. kernel: tulip.c:v0.92l 8/19/2000 Written by Donald Becker <[EMAIL PROTECTED]> kernel: http://www.scyld.com/network/tulip.html kernel: eth0: Lite-On PNIC-II rev 37 at 0xc988b000, 00:A0:CC:E1:3F:09, IRQ 9. John --------------------------------------------------------------- Linux, Win, DOS,- also known as the Good, the Bad and the Ugly! --------------------------------------------------------------- Contentment - is not the fulfillment of what you want, but the realization of how much you already have. ---------------------------------------------------------------
