I'm trying to use an older CD-ROM drive, but am getting error messages at
startup. I have a dual boot machine and the CD-ROM drive works ok under
Windows. I have included the output of dmesg.
Thanks, Jon Dowd
********************************************************************
Linux version 2.2.17-21mdk ([EMAIL PROTECTED]) (gcc version 2.95.3
19991030 (prerelease)) #1 Thu Oct 5 13:16:08 CEST 2000
Detected 501134 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 999.42 BogoMIPS
Memory: 127668k/131072k available (1136k kernel code, 416k reserved, 1724k
data, 128k init, 0k bigmem)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: chipset revision 194
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2808-0x280f, BIOS settings: hdc:DMA, hdd:pio
hda: ST310212A, ATA DISK drive
hdc: ST34340A, ATA DISK drive
hdd: FX400D, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST310212A, 9768MB w/512kB Cache, CHS=1245/255/63, UDMA(33)
hdc: ST34340A, 4103MB w/0kB Cache, CHS=8894/15/63, DMA
hdd: lost interrupt
hdd: packet command error: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: packet command error: error=0x04
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: drive not ready for command
ATAPI device hdd:
Error: No sense data -- (Sense key=0x00)
No additional sense information -- (asc=0x00, ascq=0x00)
The failed "Mode Sense 10" packet command was:
"5a 00 2a 00 00 00 00 00 18 00 00 00 "
hdd: lost interrupt
hdd: packet command error: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: packet command error: error=0x04
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: drive not ready for command
hdd: lost interrupt
ATAPI device hdd:
Unknown Error Type: No sense data -- (Sense key=0x00)
No additional sense information -- (asc=0x00, ascq=0x00)
The failed "Mode Sense 10" packet command was:
"5a 00 2a 00 00 00 00 00 18 00 00 00 "
hdd: request sense failure: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: request sense failure: error=0x04
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: drive not ready for command
hdd: lost interrupt
hdd: packet command error: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: packet command error: error=0x04
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: drive not ready for command
hdd: lost interrupt
ATAPI device hdd:
Unknown Error Type: No sense data -- (Sense key=0x00)
No additional sense information -- (asc=0x00, ascq=0x00)
The failed "Mode Sense 10" packet command was:
"5a 00 2a 00 00 00 00 00 18 00 00 00 "
hdd: request sense failure: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: request sense failure: error=0x04
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1053.846 MB/sec
p5_mmx : 993.648 MB/sec
8regs : 709.041 MB/sec
32regs : 456.438 MB/sec
using fastest function: pII_mmx (1053.846 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 < hda5 > hda3 hda4
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: drive not ready for command
hdd: lost interrupt
hdd: packet command error: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: packet command error: error=0x04
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: drive not ready for command
hdd: lost interrupt
ATAPI device hdd:
Unknown Error Type: No sense data -- (Sense key=0x00)
No additional sense information -- (asc=0x00, ascq=0x00)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 "
hdd: request sense failure: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hdd: request sense failure: error=0x04
hdc:hdc: irq timeout: status=0xff { Busy }
hdc: DMA disabled
ide1: reset: success
hdc: irq timeout: status=0xff { Busy }
ide1: reset: success
hdc: irq timeout: status=0xff { Busy }
end_request: I/O error, dev 16:00 (hdc), sector 0
unable to read partition table
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 128k freed
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x2400, IRQ 5.
eth0: RealTek RTL-8029 found at 0x2400, IRQ 5, 52:54:05:F5:81:FA.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc888b000, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport_probe: failed
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: Detected Ali M1541 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 on ALi M1541 @ 0xd0000000 64MB
[drm] Initialized tdfx 1.0.0 20000719 on minor 63
--
Jon Dowd [EMAIL PROTECTED]
Support Technician 541 482-TECH (8324)
InfoStructure & IVO http://www.mind.net
