Did you disable the PNP OS in your BIOS? Did you use sndconfig from a konsole screen or no graphic screen? Francisco Alcaraz Murcia (Spain) ----- Mensaje Original ----- Remitente: Chris Russell <[EMAIL PROTECTED]> Fecha: Martes, Febrero 6, 2001 10:49 pm Asunto: [newbie] sound card problems with 7.2 > I have a good install of 7.2 with one exception. I can't get > the sound > card to work. I have tried a dozen different sound cards with no > success. > In HardDrake, the sound card shows up but has no IRQ attached to > it. If I > type in IRQ5, I get an error that it is busy or in use. How do I > find out > what device is using IRQ 5? It is not the network card. The SCSI > card bios > says it is at IRQ 9. I baffled. HELP... I also tried ESS cards with > the > same error message. > > Here is my hardware profile: > > TMC TD6NF Dual Pentium Pro motherboard w/ 2 ppro 166/512 cpus > overclocked > to 180 > 128 megs RAM - 8 - 16mb 72-pin chips > Diamond Viper 330 PCI video > Atech 56k jumpered modem @ com 2 irq 3 > PCI network card > Buslogic scsi controller PCI > Soundblaster 16 ISA card > 2 IBM 68-pin 2.1 gig drives > Toshiba scsi CD ROM > 3 1/2 floppy > ATX case > PS/2 keyboard and mouse > both IDE turned off in BIOS > both COM ports turned off in BIOS > > Thanks! > Chris Russell > > > >
