Can I figure out something from this no. But I DO know a way to just restart 
everything. After several temper tantrums and mentals breakdowns do the 
following:

1. Insert the linux mandrake cd-rom (or installation media if it is not a 
cd-rom)

2. Boot the computer with it

3. Go through the installation process normally

4. Reinstall Linux Mandrake

I have used this techneque repetitivly (it works well.)


>From: Jacqueline Michell <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: newbie list <[EMAIL PROTECTED]>
>Subject: [newbie] sndconfig
>Date: Sun, 18 Feb 2001 15:32:23 -0600
>
>After finally running sndconfig, I have sound and CD's play music, but. .
>.  Because of new boot messages that have started to show up, I'm wondering
>if I have the wrong soundcard configured (it should be Creative SB16) or
>what.  So far, if sndconfig provides a way to scrap everything and start
>over I haven't found it.  I'll be very grateful if some kind soul could
>look over the info given below and give help and suggestions?
>
>Jacqueline Michell
>------------------------------------------------------------------
>
>from relevant lines of: /var/log/messages:
>-------
>isapnp: Card 'Creative EMU8000 PnP      (soundcard?)
>isapnp: Card 'Creative VIBRA16C PnP     (soundcard?)
>isapnp: 2 Plug & Play cards detected total
>isapnp: card 'CTL0070' order 1 not found                (soundcard--SB16??)
>-------
>later kernal boot messages:
>isapnp: Board 1 has identity  1f  00 0e 7d c0 a3  00 8c 0e: CTL00a3 Serial
>No 949696 (checksum 1f)
>isapnp: Board 2 has identity  e5  ff  ff  ff  ff  70  00  8c 0e: CTL0070
>Serial No -1 (checksum e5)
>
>After this CTL00a3 (the wavetable) is enabled OK at I/O port 620 (just as
>in Windows)
>CTL0070/-1[0]is enabled OK (with same values as in Windows) and
>CTL0070/-1[1] is enabled for games
>(there is nothing here about 'Creative VIBRA16' but it so identified in the
>file: /etc/isapnp.conf)
>-------
>even later boot messages:
>modprobe: /lib/modules/2.2.17-21mdk/misc/sb.o:
>modprobe: Hint: insmod errors can be caused by incorrect module parameters,
>including invalid IO or IRQ parameters
>modprobe:  init_module: Device or resource busy
>modprobe:  /lib/modules/2.2.17-21mdk/misc/sb.o: insmod
>/lib/modules/2.2.17-21mdk/misc/sb.o failed
>modprobe:  /lib/modules/2.2.17-21mdk/misc/sb.o: insmod sb failed
>sound: Loading sound module (sb) failed
>modprobe:  /lib/modules/2.2.17-21mdk/misc/op13.o:
>modprobe: Hint: insmod errors can be caused by incorrect module parameters,
>including invalid IO or IRQ parameters
>modprobe:  init_module:  Device or resource busy
>modprobe:  /lib/modules/2.2.17-21mdk/misc/op13.o: insmod
>/lib/modules/2.2.17-21mdk/misc/op13.o failed
>modprobe:  /lib/modules/2.2.17-21mdk/misc/op13.o: insmod op13 failed
>sound: Loading midi module (op13) failed
>
>
>Shop online without a credit card
>http://www.rocketcash.com
>RocketCash, a NetZero subsidiary
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


Reply via email to