Could the problem be heat? I have had similar problems after a few
burns or on hot days due to the drive overheating. Try to get your
drive as cool as possible and then try burning at single speed. Also,
try double speed, since many recorders out there don't like burning at
single speed.
On Sun, 11 Mar 2001 06:34, angry wrote:
> I'm pulling my hair out here, can't get cdrecording to work. here
> is all the
> info i can think of, hope someone can help
>
> [m0loch@cartman m0loch]$ uname -r
> 2.4.2-7mdk
>
> [root@cartman /root]# cdrecord -scanbus
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.1'
> scsibus0:
> 0,0,0 0) 'MITSUMI ' 'CR-4802TE ' '1.9D' Removable
> CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>
> from /var/log/messages
> Mar 9 15:15:35 cartman kernel: SCSI subsystem driver Revision: 1.00
> Mar 9 15:15:35 cartman kernel: scsi0 : SCSI host adapter emulation
> for IDE ATAPI devices
> Mar 9 15:15:35 cartman kernel: Vendor: MITSUMI Model:
> CR-4802TE Rev: 1.9D
> Mar 9 15:15:35 cartman kernel: Type:
> CD-ROM ANSI SCSI
> revision: 02
>
> the process and resulting error
> [root@cartman /root]# cdrecord dev=0,0,0 -dummy blank=fast
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.1'
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'MITSUMI '
> Identifikation : 'CR-4802TE '
> Revision : '1.9D'
> Device seems to be: Philips CDD-522.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Starting to write CD/DVD at speed 1 in dummy mode for single
> session. Starting to write CD/DVD at speed 1 in dummy mode for
> single session. Last chance to quit, starting dummy write in 1
> seconds.
> cdrecord: Input/output error. prevent/allow medium removal: scsi
> sendcmd: retryable error
> CDB: 1E 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 40s
>
> the lilo.conf line
> image=/boot/vmlinuz
> label=linux
> root=/dev/hdb5
> append="hdc=ide-scsi"
> vga=788
> read-only
> have also used kernel 2.2.17 with same results
> also updated cdrw firmware to 2.1 with same results
>
> HELP PLEASE
--
Sridhar Dhanapalan.
"There are two major products that come from Berkeley:
LSD and UNIX. We don't believe this to be a coincidence."
-- Jeremy S. Anderson
