On Monday 18 June 2001 11:34, grassi, adriano wrote:
> Hi all, I've decided to install 8.0 yesterday. Ok several
> problems occurred.
>
> 1. usb mouse not detected during installation.
> 2. ps/2 mouse not detected during installation.
> 3. after setting up networking the install crashes say that
> "it seens that memory is missing, install crash" or something
> really similar to that. This particular system has 524M of
> RAM, and athlon 700 processor.
>
> Any help is greatly appreciated.
>
> Best Regards,
>
> Adriano
You may have a bad CD.
You may have cables loose.
You may have a worn CD drive.
As far as mice go, try ONE, not both. If it is the USB mouse,
what other USB devices are plugged in.
Also, though the possibility is remote, make a copy onto a
floppy of /images/memtest-x86.bin using dd or dos rawrite and
boot it.
Finally, if you have a WD drive over Udma33 on the system,
especially if you are installing to it, this sometimes happens.
The solution is to use a 40-pibn cable to the hdd or to hit F1
at the splash screen and type
linux ide0=noautotune ide1=noautotune ide2=noautotune ...
Civileme
