Hello,
Thank you for the speedy response.
To answer your Q's:
the scsi card is a pci.
I had just tried the sndconfig as root this afternoon and then got the 24 mins of
audio before I wrote for help.
Bios:
PNP NO
Pci VGA palett snoop yes
offboard pci ide card auto
assign irq to pci vga card no
pci slot 1,2,3,4 priority auto
dma 0,1,3,5,6,7 pnp
irq 3,4,5,7,10,11,14,15 pci/pnp
irq 9 isa/eisa
isa bus clock 7.159MHz other choices pciclk/4 or pciclk/3
harddrake said sb card has
I/O 210
IRQ 5
DMA8 0
DMA16/2 0
OPL3I/O 388
AWE Wavetable unknown, device id is CTL0022
Thank you
fearless1
-----Original Message-----
From: etharp [EMAIL PROTECTED]
Sent: Mon, 6 Aug 2001 19:41:00 -0400
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: [newbie] Sound Blaster AWE64 locks kernel
I have the same sound card (well the "gold" version, but i think the
difference is windows drivers bells and whissels) and i never have had a
problem after running sndconfig, as root, from a text console, with the
execption that I have to set a mixer vol. since the default is too low to
hear anything.
Are we sure there is not a DMA or IRQ problem (conflict) and (in BIOS) set
plug and pray aware OS to "NO" or "OFF"? what slot do you have the card in?
is the sccsi card a pci, ISA, or onboard?
On Monday 06 August 2001 19:08, Peter Ruskin wrote:
> On Monday 06 August 2001 23:35, Doug X wrote:
> > Hello,
> > As stated, I have a CL SB AWE 64 ISAPNP, 128MB, P1 200MHz, Scsi,
> > LGburner IDE, CD IDE, 10GB Maxtor, 2GB Fujitsu, 4MB ATI PCI. My problem
> > is that through all versions of RH5.0 and Mandrake 6.0 - 8.0 playing
> > sound usually mp3 or anything from the hard drive freezes the kernel
> > hard, only a physical reset is available(no keyboard). This has always
> > been within 30 secs until MD 8.0. Under MD 8.0 the sound was configured
> > so that it works for about 24 mins when I just tried it today then it
> > froze again.
> >
> > I don't understand how it works for so long and then freezes everything?
> > Does anyone else have this particular problem?
> > Any suggestions?
> >
> > What other sound card would be a good one to buy for guaranteed linux
> > support and good analogue recording(ie. record from cassettes and lp's)?
>
> I have a SB AWE 64 PnP 32MB and don't have any problems. Have you tried
> running sndconfig as root?
___________________________________________________________________________
Visit http://www.visto.com.
Find out how companies are linking mobile users to the
enterprise with Visto.
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
6 lp
7 vcs
10 misc
14 sound
29 fb
128 ptm
136 pts
162 raw
Block devices:
1 ramdisk
2 fd
3 ide0
9 md
11 sr
22 ide1
1: SoundBlaster8
4: cascade
5: SoundBlaster16
CPU0
0: 96882 XT-PIC timer
1: 953 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 22037 XT-PIC serial
5: 94 XT-PIC soundblaster
10: 1683 XT-PIC eth0
11: 7 XT-PIC advansys
14: 183 XT-PIC ide0
15: 23803 XT-PIC ide1
NMI: 0
ERR: 0
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-400f : Silicon Integrated Systems [SiS] 5513 [IDE]
4000-4007 : ide0
4008-400f : ide1
c000-cfff : PCI Bus #01
d800-d8ff : Advanced System Products, Inc ABP940-U / ABP960-U
d800-d80f : advansys
dc00-dcff : ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB]
df80-df9f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
df80-df9f : ne2k-pci
Card 1 'CTL00e4:Creative SB AWE64 PnP' PnP version 1.0 Product version 1.0
Logical device 0 'CTL0045:Audio'
Device is active
Active port 0x220,0x330,0x388
Active IRQ 5 [0x2]
Active DMA 1,5
Resources 0
Priority preferred
Port 0x220-0x220, align 0x0, size 0x10, 16-bit address decoding
Port 0x330-0x330, align 0x0, size 0x2, 16-bit address decoding
Port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding
IRQ 5 High-Edge
DMA 1 8-bit byte-count compatible
DMA 5 16-bit word-count compatible
Alternate resources 0:1
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
Port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:2
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:3
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:4
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
Port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:5
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:6
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:7
Priority functional
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding
Port 0x388-0x394, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Logical device 1 'CTL7002:Game'
Compatible device PNPb02f
Device is not active
Resources 0
Priority preferred
Port 0x200-0x200, align 0x0, size 0x8, 16-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x200-0x208, align 0x7, size 0x8, 16-bit address decoding
Logical device 2 'CTL0022:WaveTable'
Device is not active
Resources 0
Priority preferred
Port 0x620-0x620, align 0x0, size 0x4, 16-bit address decoding
Port 0xa20-0xa20, align 0x0, size 0x4, 16-bit address decoding
Port 0xe20-0xe20, align 0x0, size 0x4, 16-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x620-0x680, align 0x1f, size 0x4, 16-bit address decoding
Port 0xa20-0xa80, align 0x1f, size 0x4, 16-bit address decoding
Port 0xe20-0xe80, align 0x1f, size 0x4, 16-bit address decoding
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 5591/5592 Host (rev 2).
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).
Master Capable. Latency=128.
I/O at 0x4000 [0x400f].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 1).
Bus 0, device 1, function 1:
Class ff00: Silicon Integrated Systems [SiS] ACPI (rev 0).
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. No bursts. Min Gnt=2.
Bus 0, device 9, function 0:
VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB]
(rev 154).
Master Capable. Latency=64. Min Gnt=8.
Non-prefetchable 32 bit memory at 0x10000000 [0x10ffffff].
I/O at 0xdc00 [0xdcff].
Non-prefetchable 32 bit memory at 0xffaff000 [0xffafffff].
Bus 0, device 10, function 0:
SCSI storage controller: Advanced System Products, Inc ABP940-U / ABP960-U (rev 3).
IRQ 11.
Master Capable. Latency=64. Min Gnt=4.Max Lat=4.
I/O at 0xd800 [0xd8ff].
Non-prefetchable 32 bit memory at 0xffafef00 [0xffafefff].
Bus 0, device 11, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0).
IRQ 10.
I/O at 0xdf80 [0xdf9f].
# $Id: pnpdump_main.c,v 1.25 2001/01/06 20:45:58 fox Exp $
# Release isapnptools-1.24
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER
-DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier b1 1e 0d 1f 68 e4 00 8c 0e
# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier b1 1e 0d 1f 68 e4 00 8c 0e)
# Vendor Id CTL00e4, Serial Number 504176488, checksum 0xB1.
# Version 1.0, Vendor version 1.0
# ANSI string -->Creative SB AWE64 PnP<--
# Vendor defined tag: 73 02 45 20
#
# Logical device id CTL0045
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL00e4/504176488 (LD 0
# ANSI string -->Audio<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# IRQ 5.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 1.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 1))
# Next DMA channel 5.
# 16 bit DMA only
# Logical device is a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0220
# IO base alignment 1 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0330
# Maximum IO base address 0x0330
# IO base alignment 1 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0330))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 4
# (IO 2 (SIZE 4) (BASE 0x0388))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 5, 6 or 7.
# 16 bit DMA only
# Logical device is a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 48 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 4
# (IO 2 (SIZE 4) (BASE 0x0388))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 5, 6 or 7.
# 16 bit DMA only
# Logical device is a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 48 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 5, 6 or 7.
# 16 bit DMA only
# Logical device is not a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 48 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 4
# (IO 2 (SIZE 4) (BASE 0x0388))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 48 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Start dependent functions: priority functional
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 5, 6 or 7.
# 16 bit DMA only
# Logical device is a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 16 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0394
# IO base alignment 4 bytes
# Number of IO addresses required: 4
# (IO 2 (SIZE 4) (BASE 0x0388))
# End dependent functions
(NAME "CTL00e4/504176488[0]{Audio }")
# (ACT Y)
))
#
# Logical device id CTL7002
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL00e4/504176488 (LD 1
# Compatible device id PNPb02f
# ANSI string -->Game<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0x0200
# IO base alignment 1 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0200))
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0x0208
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0200))
# End dependent functions
(NAME "CTL00e4/504176488[1]{Game }")
# (ACT Y)
))
#
# Logical device id CTL0022
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL00e4/504176488 (LD 2
# ANSI string -->WaveTable<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0620
# Maximum IO base address 0x0620
# IO base alignment 1 bytes
# Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0620))
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0620
# Maximum IO base address 0x0680
# IO base alignment 32 bytes
# Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0620))
# End dependent functions
# Vendor defined tag: 75 01 69 46 35 55
(NAME "CTL00e4/504176488[2]{WaveTable }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
