OUTPUT
####################
dmesg
Linux version 2.4.8-12mdk ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release / Linux-Mandrake 8.1))
#1 Fri Aug 24 16:18:19 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount
Initializing CPU#0
Detected 265.912 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 530.84 BogoMIPS
Memory: 61572k/65536k available (1068k kernel code, 3576k reserved, 393k
data, 708k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 0080f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0080f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0080f9ff 00000000 00000000 00000000
CPU: Common caps: 0080f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Klamath) stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfda11, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SA2 Sound Chip'
isapnp: 1 Plug & Play card detected total
PnP: PNP BIOS installation structure at 0xc00fa1b0
PnP: PNP BIOS version 1.0, entry at f0000:a2b0, dseg at 400
PnP: 14 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.113 (20010820) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
block: queued sectors max/low 40602kB/13534kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL1280A, ATA DISK drive
hdc: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 2503872 sectors (1282 MB) w/83KiB Cache, CHS=621/64/63, DMA
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 708k freed
PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1
parport0: PC-style at 0x378, irq 7 [PCSPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (interrupt-driven).
Real Time Clock Driver v1.10d
Adding Swap: 70524k swap-space (priority -1)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.72 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.72 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 16:31:43 Aug 24 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
usb.c: registered new driver hiddev
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
devfs: devfs_register(): device already registered: "snd/controlC0"
devfs: devfs_register(): device already registered: "snd/controlC1"
devfs: devfs_register(): device already registered: "snd/controlC2"
devfs: devfs_register(): device already registered: "snd/controlC3"
devfs: devfs_register(): device already registered: "snd/controlC4"
devfs: devfs_register(): device already registered: "snd/controlC5"
devfs: devfs_register(): device already registered: "snd/controlC6"
devfs: devfs_register(): device already registered: "snd/controlC7"
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
############################
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3080 (3.0 Kb) TX bytes:3080 (3.0 Kb)
###############################
cat /proc/interrupts
CPU0
0: 2141806 XT-PIC timer
1: 320 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 0 XT-PIC usb-uhci
7: 0 XT-PIC parport0
8: 1 XT-PIC rtc
12: 101 XT-PIC PS/2 Mouse
14: 11511 XT-PIC ide0
15: 38 XT-PIC ide1
NMI: 0
ERR: 0
######################################
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
fc00-fcff : Realtek Semiconductor Co., Ltd. RTL-8139
ff00-ff3f : 3Com Corporation 3c905 100BaseTX [Boomerang]
ff80-ff9f : Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II]
ff80-ff9f : usb-uhci
ffa0-ffaf : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
##############################################
cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 2).
Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
(rev 1).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton
II] (rev 0).
Master Capable. Latency=32.
I/O at 0xffa0 [0xffaf].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton
II] (rev 1).
IRQ 3.
Master Capable. Latency=32.
I/O at 0xff80 [0xff9f].
Bus 0, device 11, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA 2164W
[Millennium II] (rev 0).
IRQ 11.
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xfb000000 [0xfbffffff].
Non-prefetchable 32 bit memory at 0xffbec000 [0xffbeffff].
Non-prefetchable 32 bit memory at 0xff000000 [0xff7fffff].
Bus 0, device 17, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
16).
IRQ 9.
Master Capable. Latency=240. Min Gnt=32.Max Lat=64.
I/O at 0xfc00 [0xfcff].
Non-prefetchable 32 bit memory at 0xffbebc00 [0xffbebcff].
Bus 0, device 19, function 0:
Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
(rev 0).
IRQ 10.
Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0xff00 [0xff3f].
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
