Thanx it worked quite fine the kernel loads nicely with my original settings . A few problems appeared though not directly related to the kernel . First the new kernel doesnt seem to accept the nvidia drivers so after switching the kernel i have to edit XF86config-4 cause the new kernel runs only the nv driver and not the nvidia driver . Second is related to my quickcam it has a integrated micro which will make my sounddevice busy and second is that i have a tvcard wich uses the module "videodev" and the camera too so i have to always unload the bttv module and after that i can load the quickcam module . Is there a way of running them all at the same time funktionally ? here my lsmod output: (without the quickcam modules wich will after loading them attach to "videodev" "audio" and "usb")
# lsmod Module Size Used by agpgart 30272 3 (autoclean) NVdriver 724720 14 (autoclean) sr_mod 15424 0 (autoclean) (unused) w83781d 17312 0 (unused) i2c-proc 6608 0 [w83781d] i2c-isa 1312 0 (unused) audio 37872 0 (unused) es1371 26800 1 soundcore 4304 4 [audio es1371] ac97_codec 9344 0 [es1371] gameport 1888 0 [es1371] nfsd 70688 8 (autoclean) lockd 50928 1 (autoclean) [nfsd] sunrpc 63968 1 (autoclean) [nfsd lockd] lp 5792 0 autofs4 9904 2 (autoclean) af_packet 12656 1 (autoclean) ip_vs 62672 0 (autoclean) usb-uhci 21648 0 (unused) usbcore 51648 1 [audio usb-uhci] ne2k-pci 5312 1 (autoclean) 8390 6528 0 (autoclean) [ne2k-pci] nls_iso8859-1 2880 4 (autoclean) nls_cp850 3632 4 (autoclean) vfat 10064 4 (autoclean) fat 32576 0 (autoclean) [vfat] tuner 8560 1 (autoclean) tvaudio 10272 0 (autoclean) (unused) bttv 60272 0 videodev 5056 2 [bttv] i2c-algo-bit 7392 1 [bttv] i2c-core 13696 0 [w83781d i2c-proc i2c-isa tuner tvaudio bttv i2c-algo-bit] ide-scsi 8240 0 parport_pc 20288 2 (autoclean) ppa 9936 0 (unused) parport 25088 2 [lp parport_pc ppa] scsi_mod 93312 3 [sr_mod ide-scsi ppa] rtc 5856 0 (autoclean) reiserfs 158368 3 Cheers Florian On Saturday 24 November 2001 05:34, Sridhar Dhanapalan wrote: > On Sun, 25 Nov 2001 19:41:07 +0100, Florian Struck > <[EMAIL PROTECTED]> > > wrote: > > Hi i want to install kernel 2.4.13 from the latest cooker rpms does > > anyone have something to say to that ? =) > > Thing is that i just bought a logitech quickcam pro 3000 and on > > linuxusbproject they say that its supported only by the 2.4.13 kernel > > so i want to give it a try. > > Here is the general procedure: > > # rpm -ivh kernel-2.4.13-xxmdk.i586.rpm > > This will install the new kernel, while keeping the old one intact. If you > have problems with 2.4.13, you can still boot into your old kernel. You may > need to edit /etc/lilo.conf (or /boot/grub/menu.lst if you use grub) to > make the new kernel appear in the boot menu.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
