OK, at least with Evolution I can read html email. But you will notice
how many people (rightly) complained.
Your network setup looks good on first glance. You have a nice
non-routing IP address, and your default gateway is on the same network.
Questions:
What are the IP addresses of your other machines? (You don't have any
duplicate IP addresses, do you?)
Did you specify the IP address, or do you have dhcp running?
How do you connect ot the Internet (dial-up, dsl, cable modem, etc.)?
Have you tried pinging your machines yet? If so, what was the outcome of
that?
Hang in there, we are trying to help you!
Dave
On Fri, 2001-12-14 at 13:25, bugs FIX wrote:
[root@localhost root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:8B:35:0C:18
inet addr:10.0.0.2 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:10 dropped:0 overruns:0 frame:0
&nbs! p; TX packets:0 errors:29 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:299 errors:0 dropped:0 overruns:0 frame:0
TX packets:299 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:21610 (21.1 Kb) TX bytes:21610 (21.1 Kb)
[root@localhost root]# eth0
bash: eth0: command not found
[root@localhost root]# route -n
Kernel IP routing table
Destination Gateway &n! bsp; Genmask Flags Metric
Ref Use Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U ! 0 0
0 lo
0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0
eth0
--
All laws are simulations of reality.
-- John C. Lilly
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
