X-RebelTech Is Here: http://www.rebeltech.ca
MIME-Version: 1.0
Message-Id: <[EMAIL PROTECTED]>
Content-Transfer-Encoding: 8bit
ok, here is output of /proc/pci and /proc/interrupts
PCI devices found:
Bus 0,
device 0, function 0:
Host bridge: Intel
Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 3).
Master Capable. Latency=32.
Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 19.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
IRQ 9.
Bus 0, device 13, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
IRQ 17.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xd400 [0xd4ff].
Non-prefetchable 32 bit memory at 0xd8000000 [0xd80000ff].
Bus 0, device 19, function 0:
Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev
1).
IRQ 18.
Master Capable. Latency=120. Min Gnt=8.Max Lat=8.
I/O at 0xd800 [0xd807].
I/O at 0xdc00 [0xdc03].
I/O at 0xe000 [0xe0ff].
Bus 0, device 19, function 1:
Unknown mass storage controller: Triones Technologies, Inc. HPT366 (#2)
(rev 1).
IRQ 18.
Master Capable. Latency=120. Min Gnt=8.Max Lat=8.
I/O at 0xe400 [0xe407].
I/O at 0xe800 [0xe803].
I/O at 0xec00 [0xecff].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 122).
IRQ 16.
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xd6000000 [0xd6ffffff].
I/O at 0xc000 [0xc0ff].
Non-prefetchable 32 bit memory at 0xd5000000 [0xd5000fff].
and
CPU0 CPU1
0: 2315877 2344890 IO-APIC-edge timer
1: 7440 7306 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 58439 59132 IO-APIC-edge serial
4: 170444 171140 IO-APIC-edge serial
7: 9524 9301 IO-APIC-edge MS Sound System
14: 22 5 IO-APIC-edge ide0
15: 3 1 IO-APIC-edge ide1
17: 2400 2534 IO-APIC-level eth0
18: 61588 62072 IO-APIC-level ide2
NMI: 0 0
LOC: 4661143 4661154
ERR: 0
MIS: 0
many thanks!
moose
On Thursday 10 January 2002 06:57, you wrote:
> post output of (in a text console, as root, without the quotes) "cat
> /proc/interrupts" and "cat /proc/pci"
>
> On Thursday 10 January 2002 00:02, you wrote:
> > X-RebelTech Is Here: http://www.rebeltech.ca
> > MIME-Version: 1.0
> > Message-Id: <[EMAIL PROTECTED]>
> > Content-Transfer-Encoding: 8bit
> >
> > hi all,
> >
> > i am still having problems with this network card. i don't think it is
> > some other hardware issue with this machine since it has been very stable
> > with a 10mbps ne2000 isa card for almost a year.
> >
> > so, installed the smc1244 which seems to have a realtek 8139C chip in it.
> > thanks to D.M on this list, i was able to get the card working, but i am
> > having random reboots now. when i try to do things like print across the
> > network or access a remote file. works most of the time, but every now
> > and then, i am left staring at my POST screen and hearing the RAM check
> > count.
> >
> > i have been able to acquire and compile (finally) the D Becker RTL8139
> > driver, but can't insmod it. it throws a number of unresolved symbols
> > such as: rtl8139.o: unresolved symbol __netdev_watchdog_up
> > rtl8139.o: unresolved symbol eth_type_trans
> > and the list goes on.
> > i was at scyld.com was able to compile and insmod pci-scan.o.
> > searched the mailing list archives about this error. saw a number of
> > other people had same problem. but no answers posted. too obvious? well,
> > not to me.
> >
> > i can't get anywhere with the newer versions of 8139too. there are no
> > compiling instructions that i could find.
> > if i try gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c 8139too.c
> > it throws:
> > 8139too.c:101:28: linux/compiler.h: No such file or directory
> > 8139too.c:110:23: linux/mii.h No such file or directory
> > 8139too.c:111:30: linux/completion.h: No such file or directory
> >
> > i haven't a clue where to acquire these file.
> > i have all the source and devel packages installed.
> > i am running LM8.0 2.4.3-20mdksmp
> >
> > <rant>
> > i really couldn't care less about which driver performs better, because
> > if performance was my goal, i wouldn't have bought this #$%#$% card in
> > the first place. i just want my stable machine back.
> > </rant>
> >
> >
> > many thanks in advance.
> > moose.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
