Civileme, this is the output of those commands...

[root@localhost root]# dmesg
Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96
20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001
BIOS-provided physical RAM map:
�BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
�BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
�BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
�BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
�BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
�BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=1602 devfs=mount
Initializing CPU#0
Detected 400.911 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 254828k/262080k available (1086k kernel code, 6868k reserved, 397k
data, 712k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: � � After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: � � � � � � Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00fbdc0
PnP: PNP BIOS version 1.0, entry at f0000:bde8, dseg at f0000
PnP: 13 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 169069kB/56356kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
� � ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
� � ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SV0643A, ATA DISK drive
hdb: ATAPI CDROM, ATAPI CD/DVD-ROM drive
hdc: WDC WD300BB-00AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12594960 sectors (6449 MB) w/482KiB Cache, CHS=784/255/63, UDMA(33)
hdc: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(33)
hdb: ATAPI 44X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
�/dev/ide/host0/bus0/target0/lun0: p1
�/dev/ide/host0/bus1/target0/lun0: [PTBL] [3649/255/63] p1 < p5 p6 p7 > p2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 712k freed
Real Time Clock Driver v1.10d
Adding Swap: 514040k swap-space (priority -1)
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
reiserfs: checking transaction log (device 16:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Davicom DM9xxx net driver, version 1.36p1 (May 12, 2001)
PCI: Found IRQ 10 for device 00:12.0
PCI: Sharing IRQ 10 with 00:07.2
eth0: Davicom DM9102 at 0xe800, 00:80:ad:7d:2c:95, IRQ 10
ip_tables: (c)2000 Netfilter core team
ip_conntrack (2047 buckets, 16376 max)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:30:17 Sep 23 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:12.0
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
usb.c: USB disconnect on device 1
usb.c: USB bus 1 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
devfs: devfs_register(): device already registered: "0"
lp0: using parport0 (interrupt-driven).
es1370: version v0.37 time 17:26:50 Sep 23 2001
PCI: Found IRQ 12 for device 00:11.0
es1370: found adapter at io 0xe400 irq 12
es1370: features: joystick off, line in, mic impedance 0
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
auditIN=ppp0 OUT= MAC= SRC=80.16.45.126 DST=200.63.158.246 LEN=60 TOS=0x00
PREC=0x40 TTL=48 ID=27151 DF PROTO=TCP SPT=1889 DPT=111 WINDOW=32120 
RES=0x00
SYN URGP=0
auditIN=ppp0 OUT= MAC= SRC=143.107.105.14 DST=200.63.158.246 LEN=40 TOS=0x00
PREC=0x40 TTL=118 ID=1244 PROTO=TCP SPT=22 DPT=22 WINDOW=38560 RES=0x00 SYN
URGP=0
auditIN=ppp0 OUT= MAC= SRC=213.8.91.120 DST=200.63.158.246 LEN=40 TOS=0x00
PREC=0x40 TTL=232 ID=38156 PROTO=TCP SPT=21 DPT=21 WINDOW=40 RES=0x00 SYN
URGP=0





[root@localhost root]# cat /etc/modules.conf

pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias eth0 dmfe
above snd-card-ens1370 snd-pcm-oss
alias sound-slot-0 es1370
[root@localhost root]#






[root@localhost root]# lspcidrake
agpgart � � � � : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge
unknown � � � � : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge
unknown � � � � : Intel Corporation|82371AB PIIX4 ISA
unknown � � � � : Intel Corporation|82371AB PIIX4 IDE
usb-uhci � � � �: Intel Corporation|82371AB PIIX4 USB
sonypi � � � � �: Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE
Controller
snd-card-ens1370: Ensoniq|ES1370 [AudioPCI]
tulip � � � � � : Davicom|Ethernet 100/10 MBit DM9102
Card:Intel 740 (generic): Intel Corporation|i740



hope this gives you an idea of what it might be the problem..... see you 
later.
Thanks.
;o)


Damian.


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to