Hi Todd, First off, if there are any errors in this, it's because I had to copy it from the archive. Sigh . .
I think your problem is that you've no entry for the /dev/scd0 in fstab. I've tried xcdroast and others, and have found tha gtoaster works the best and is the easiest to set up. Once you add that entry to fstab, reboot. Load Gtoaster and click on Preferences > CDROM and Recorder Setup > Scan Bus : it should, at least, give you the cdrw. To add the CDROM click Add and manually copy the same info, but uncheck "This drive is a CD Writer" and,as well, enter the correct "Device File" (probably /mnt/cdrom in your case) Now, if you don't get this or it refuses to "see" the wriiter, there's one other thing you can do. Hope it works . . Regards, Andre *************************************************************** *************************************************************** [Original Message from Todd Slater:] I've been trying to get xcdroast to work without any luck. I searched the mail archives for some info, tried some tips, to no avail. My CD R/RW is an HP CD-Writer Plus. CD-ROM is a Toshiba. When I run setup in xcdroast, the device scan only shows my zip and CD-R. For the CD Reader configuration, it defaults to the CD-R and will not allow me to enter my CD-ROM. I have also tried to burn WAVs using Gcombust and Gnome-toaster, but get errors. (Wrong scsi settings or no permission to device, but I added myself to the cdwriter group.) Here is an error I get using eroaster: Starting to write CD/DVD at speed 4 in write mode for single session. Waiting for reader process to fill input buffer ... cdrecord: Input/output error. mode select g1: scsi sendcmd: no error CDB: 55 10 00 00 00 00 00 00 3C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.008s timeout 200s cdrecord: Warning: using default CD write parameter data. Mode Select Data 00 15 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cdrecord: Cannot open new session. My hardware info as reported by Harddrake: R/RW 4x4x24 Vendor: Unknown Model: R/RW 4x4x24 Device: /dev/hdd Bus Type: ATAPI/IDE Toshiba CD-ROM Vendor: Unknown Model: TOSHIBA CD-ROM XM-6602B Device: /dev/hdc Bus Type: ATAPI/IDE Vendor: IDE-CD IDE-CD R/RW Model: R/RW 4x4x24 Device: /dev/scd0 Bus Type: SCSI My fstab contains: /dev/hdc /mnt/cdrom auto user,iocharset=iso8859-1,umask=0,exec,codepage=850,ro,noauto 0 0/dev/scd0 /mnt/cdrom2 auto user,iocharset=iso8859-1,umask=0,exec,codepage=850,ro,noauto 0 0 Any idears? Thanks, Todd -- Todd Slater Examinations are formidable even to the best prepared, for even the greatest fool may ask more than the wisest man can answer. (C.C. Colton) -- Please pray the Holy Rosary to end the holocaust of abortion. Remember in your prayers the suffering souls in Purgatory. May God bless you abundantly in His love! For a free Cenacle Scriptural Rosary Booklet -- http://www.webhart.net/csrb/
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
