On Monday 18 March 2002 04:21 am, you wrote: > Hi, > > When I try to burn an audio CD in TAO I get an error (in DAO it works > fine). The output of cdrecord is as follows: > > Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" > fs=4096k driveropts=burnproof -v -useinfo speed=2 -dummy -eject -pad > -audio "/home/gui/tmp/Backbeat - Please Mr Postman.wav" ... > > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.20 > pregap1: -1 > Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 J�rg > Schilling TOC Type: 0 = CD-DA > Using libscg version 'schily-0.5' > Driveropts: 'burnproof' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'HL-DT-ST' > Identifikation : 'CD-RW GCE-8240B ' > Revision : '1.06' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Drive buf size : 2029726720 = 1982155 KB > FIFO size : 4194304 = 4096 KB > Track 01: audio 23 MB (02:17.92) no preemp pad > Track 02: audio 45 MB (04:28.90) no preemp pad > Total size: 68 MB (06:48.84) = 30663 sectors > Lout start: 69 MB (06:50/63) = 30663 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 6 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, high Beta category (A+) (3) > ATIP start of lead in: -11625 (97:27/00) > ATIP start of lead out: 359849 (79:59/74) > Disk type: unknown > Manuf. index: 81 > Manufacturer: ILLEGAL OLD CODE: Old Ritek Co.??? > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 329186 > Starting to write CD/DVD at speed 16 in dummy mode for single > session. 0 seconds. Operation starts. > cdrecord: Turning BURN-Proof on > Waiting for reader process to fill input buffer ... > input buffer ready. > cdrecord: Input/output error. write_g1: scsi sendcmd: no error > Starting new track at sector: 0 > CDB: 2A 00 00 00 00 00 00 00 1B 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.002s timeout 40s > > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 > write track data: error after 0 bytes > Writing time: 5.033s > Fixating... > WARNING: Some drives don't like fixation in dummy mode. > Fixating time: 0.003s > > Does anyone know what could be wrong? > > TIA,
Try disabling the "dummy" mode. -- Jonathan Dlouhy Monday, March 18, 2002 ---------------------------------------------------------------- HEADLINE! Man Struck by Lightning Faces Battery Charge ---------------------------------------------------------------- Registered Linux user #264482 Powered by Mandrake Linux 8.1
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
