On Tue, 19 Mar 2002, Marc Oestreicher wrote:

For sure I will do that also, I haven't though of "external" temperature
control, thanks!

At the end I will get an good machine, maybe not 'beautifull' but
'workable'.... if both of us 'fit' into the room! ;-)

With you input I just remembered of some "cabinets" I've seen for servers
and industrial usage that might keep the noise out!

>        If you expect SEVERE temperature conditions you could consider
> going to the local industrial supply store or Newark electronics and getting
>  a big ol muffin fan or even 2 one to pull air into the case and one to blow
>  air out, this may reqiure some cutting and chopping on the side cover
>  to make them fit.  You may also want to get a bi metalic disc switch
>  to wire in with the fans so that they will only turn on at over 90 degrees F
>  And avoid having the noise and power use wen not needed.
>       This may be over kill but it will put enough air through the cabinet no
>  matter what!!   There are also filter grilles avalable for this type of fan to
>  keep the dirt out.  This may sound a bit wild but I have been useing this
>  method on industrial cabnets that operate in worse conditions than you
>  want to think about and have NEVER had a over heating problem in 15
>  years even in cabinets with PLC'S  (industrial control computers) and
>  motor drives that produce many times more heat than any linux box
>  all inside the same cabinet!  These fans may require a little work with
>  a soldering  iron to get 115 or 220 volts to them because they are not normaly
>  used in computers so if you have any questions about wireing   metal fabrication
>  or parts sorces feel free to contact me off list.
>    This may be extreme but it will work no matter what kind of conditions
>  you may have.
>  Good Luck
>  Marc
>
>>> Want to buy your Pack or Services from MandrakeSoft?
>>> Go to http://www.mandrakestore.com
>>
>>
>>
>>_________________________________________________________
>>Do You Yahoo!?
>>Get your free @yahoo.com address at http://mail.yahoo.com
>>
>>
>>
>
>
>
>
>

-- 
==========================================================
Linux user # 102240 => Machine # 96125 => Seti@home user
==========================================================


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to