Re: [newbie] problems with 8.2

Blood Slap Fri, 05 Apr 2002 16:40:05 -0800

I didn't see that v42 there, but here's my config files are attached.


----- Original Message -----
From: "Blood Slap" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 04, 2002 7:29 PM
Subject: Re: [newbie] problems with 8.2


> It is not mobility or pro, it's just an ATI Expert 2000 Rage 128, but I
will
> check the config file.
> Thanks.
> ----- Original Message -----
> From: "Charles A Edwards" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, April 04, 2002 11:36 AM
> Subject: Re: [newbie] problems with 8.2
>
>
> > On Thu, 04 Apr 2002 09:57:44 -0700
> > "Michael Kovary" <[EMAIL PROTECTED]> wrote:
> >
> > >I have now done a clean install of 8.2, and most of the problems from
> >before are gone, but while running KDE and Gnome (might in other window
> >managers but not so far) the entire machine will freeze except for my
> >mouse and sound if music was playing at the time.  And I'm forced to >use
> the reset button.  Is this just a bug in 8.2 that can be fixed?  >Will I
> have to update something?
> >
> >
> >
> >
> > Is yours a straight Rage128 card?
> > Not a mobility or Pro or some other variation.
> >
> > It should not be there but just in case check your /etc/X11/X86Config-4.
> > In the module section if there is an entry for "v41", either # it out or
> remove it.
> > Restart X and your problem will be gone.
> >
> > If the above was not the cause of your problem please post your
> XF86Conf-4.
> >
> >
> >     Charles
> >
> >
> >
> >
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
> > Want to buy your Pack or Services from MandrakeSoft?
> > Go to http://www.mandrakestore.com
> >
>
>


----------------------------------------------------------------------------
----


> Want to buy your Pack or Services from MandrakeSoft?
> Go to http://www.mandrakestore.com
>

# File generated by XFdrake.

# ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of

# this file. # **********************************************************************

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts.

FontPath "unix/:-1"

EndSection

# **********************************************************************

# Server flags section. # **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom

# This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail

EndSection

# **********************************************************************

# Input devices # **********************************************************************

# **********************************************************************

# Keyboard section # **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"

Driver "Keyboard"

Option "AutoRepeat" "250 30"

Option "XkbRules" "xfree86"

Option "XkbModel" "pc105"

Option "XkbLayout" "us"

EndSection

# **********************************************************************

# Pointer section # **********************************************************************

Section "InputDevice"

Identifier "Mouse1"

Driver "mouse"

Option "Protocol" "IMPS/2"

Option "Device" "/dev/psaux"

Option "ZAxisMapping" "4 5"

# Option "Emulate3Buttons"

# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

Section "Module"

# This loads the DBE extension module.

Load "dbe"

Load "glx"

Load "dri"

# This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module.

SubSection "extmod"

#Option "omit xfree86-dga"

EndSubSection

# This loads the Type1 and FreeType font modules

Load "type1"

Load "freetype"

EndSection

Section "DRI"

Mode 0666

EndSection

# **********************************************************************

# Monitor section # **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "NEC MultiSync XV15+"

VendorName "NEC"

ModelName "Unknown"

# HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.0-65.0

# VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S

# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 55.0-100.0

# This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?

# 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616

EndSection

# **********************************************************************

# Graphics device section # **********************************************************************

Section "Device"

Identifier "Generic VGA"

Driver "vga"

EndSection

Section "Device"

Identifier "ATI Rage 128"

VendorName "Unknown"

BoardName "Unknown"

Driver "r128"

# VideoRam 32768

# Clock lines

# Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor"

Option "UseCCEFor2D" "false"

Option "AGPMode" "1"

Option "DPMS" "on"

EndSection

# **********************************************************************

# Screen sections # **********************************************************************

Section "Screen"

Identifier "screen1"

Device "ATI Rage 128"

Monitor "NEC MultiSync XV15+"

DefaultColorDepth 16

Subsection "Display"

Depth 8 Modes "1024x768" "800x600" "640x400"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 15 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 16 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 24 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 32 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

EndSection

Section "ServerLayout"

Identifier "layout1"

Screen "screen1"

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard" EndSection

# File generated by XFdrake.

# ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of

# this file. # **********************************************************************

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts.

FontPath "unix/:-1"

EndSection

# **********************************************************************

# Server flags section. # **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom

# This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail

EndSection

# **********************************************************************

# Input devices # **********************************************************************

# **********************************************************************

# Keyboard section # **********************************************************************

Section "Keyboard"

Protocol "Standard"

# when using XQUEUE, comment out the above line, and uncomment the

# following line

#Protocol "Xqueue"

AutoRepeat 250 30

# Let the server do the NumLock processing. This should only be # required when using pre-R6 clients #ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) #Xleds "1 2 3"

#To set the LeftAlt to Meta, RightAlt key to ModeShift, #RightCtl key to Compose, and ScrollLock key to ModeLock:

LeftAlt Meta

RightAlt Meta

ScrollLock Compose

RightCtl Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use:

# XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use:

# XkbModel "microsoft"

# # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with:

# XkbLayout "de"

# or:

# XkbLayout "de"

# XkbVariant "nodeadkeys"

# # If you'd like to switch the positions of your capslock and

# control keys, use:

# XkbOptions "ctrl:swapcaps"

# These are the default XKB settings for XFree86

# XkbRules "xfree86"

# XkbModel "pc101"

# XkbLayout "us"

# XkbVariant ""

# XkbOptions ""

XkbKeycodes "xfree86"

XkbTypes "default"

XkbCompat "default"

XkbSymbols "us(pc105)"

XkbGeometry "pc"

XkbRules "xfree86"

XkbModel "pc105"

XkbLayout "us"

EndSection

# **********************************************************************

# Pointer section # **********************************************************************

Section "Pointer"

Protocol "IMPS/2"

Device "/dev/psaux"

ZAxisMapping 4 5

# Emulate3Buttons

# Emulate3Timeout 50

# ChordMiddle is an option for some 3-button Logitech mice

# ChordMiddle

EndSection

# **********************************************************************

# Monitor section # **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "NEC MultiSync XV15+"

VendorName "NEC"

ModelName "Unknown"

# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.0-65.0

# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 55.0-100.0

# Modes can be specified in two formats. A compact one-line format, or # a multi-line format.

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

# Mode "1024x768i"

# DotClock 45

# HTimings 1024 1048 1208 1264

# VTimings 768 776 784 817

# Flags "Interlace"

# EndMode # 640x480, 60.0Hz; hfreq=31.469000, vfreq=59.939999 ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync

# 640x480, 67.0Hz # 640x480, 72.0Hz; hfreq=37.861000, vfreq=72.808998 ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504 -hsync -vsync # 640x480, 75.0Hz; hfreq=37.500000, vfreq=75.000000 ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync

# 720x400, 70.0Hz

# 720x400, 88.0Hz # 800x600, 56.0Hz; hfreq=35.155998, vfreq=56.250000 ModeLine "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.879002, vfreq=60.317001 ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600, 75.0Hz; hfreq=46.875000, vfreq=75.000000 ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync

# 832x624, 75.0Hz

# 1024x768, 87.0iHz # 1024x768, 60.0Hz; hfreq=48.362999, vfreq=60.004002 ModeLine "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 1024x768, 70.0Hz; hfreq=56.476002, vfreq=70.069000 ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768, 75.0Hz; hfreq=60.022999, vfreq=75.028999 ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1280x1024, 75.0Hz; hfreq=79.975998, vfreq=75.025002 ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync

# This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used.

# 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 400 409 411 450

# 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525

# 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync

# 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521

# 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync

# 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync # 1152x864 @ 89 Hz interlaced, 44 kHz hsync ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync

# 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync

# 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync

# 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync

# 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823

# 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895

# 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054

# 1400x1050 @ 60 Hz, 65.5 kHz ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync

# 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync

# 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync

# 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

# 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync

# 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064

# 1400x1050 @ 75 Hz, 82.2 kHz hsync ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync

# 1600x1200 @ 70 Hz, 87.50 kHz hsync Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync

# 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync

# 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync

# 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

# 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync

# 1600x1200 @ 85 Hz, 106.3 kHz hsync ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

# 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# 1920x1440 @ 60 Hz, 90.0 kHz hsync ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync

# 1920x1440 @ 75 Hz, 112.5kHz hsync ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync

# 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync

# Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan

# 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan

# 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan

# 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan

# 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan

# 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan

# 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan

# This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?

# 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616

EndSection

# **********************************************************************

# Graphics device section # **********************************************************************

Section "Device"

Identifier "Generic VGA"

Chipset "generic"

EndSection

Section "Device"

Identifier "ATI Rage 128"

VendorName "Unknown"

BoardName "Unknown"

# Chipset "ATI Rage 128"

# VideoRam 32768

# Clock lines

# Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor"

Option "power_saver"

EndSection

# **********************************************************************

# Screen sections # **********************************************************************

# The Colour SVGA server

Section "Screen"

Driver "svga"

Device "Generic VGA"

Monitor "NEC MultiSync XV15+"

Subsection "Display"

Depth 8

Modes "320x200"

ViewPort 0 0

EndSubsection

EndSection

Section "Screen"

Driver "vga16"

Device "Generic VGA"

Monitor "NEC MultiSync XV15+"

Subsection "Display"

Modes "640x480" "800x600"

ViewPort 0 0

EndSubsection

EndSection

Section "Screen"

Driver "vga2"

Device "Generic VGA"

Monitor "NEC MultiSync XV15+"

Subsection "Display"

Modes "640x480" "800x600"

ViewPort 0 0

EndSubsection

EndSection

Section "Screen"

Driver "accel"

Device "ATI Rage 128"

Monitor "NEC MultiSync XV15+"

DefaultColorDepth 16

Subsection "Display"

Depth 8 Modes "1024x768" "800x600" "640x400"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 15 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 16 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 24 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 32 Modes "1024x768" "800x600" "640x480"

ViewPort 0 0

EndSubsection

EndSection

Section "Screen"

Driver "fbdev"

Device "ATI Rage 128"

Monitor "NEC MultiSync XV15+"

DefaultColorDepth 16

Subsection "Display"

Depth 8

Modes "default"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 15

Modes "default"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 16

Modes "default"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 24

Modes "default"

ViewPort 0 0

EndSubsection

Subsection "Display"

Depth 32

Modes "default"

ViewPort 0 0

EndSubsection

EndSection

Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Re: [newbie] problems with 8.2

Reply via email to