Thanks to everyone who replied. The problem was that I didn't have setserial installed and didn't have a clue where to find it. But now that's fixed and everything is working perfectly. So thanks again to everyone who replied.
CJ C.J.Kent wrote: > I have an internal non-PnP ISA modem that is working fine under > windows and was working fine under Red Hat 6.1. I've replaced Red Hat > with Mandrake 8.2 and cannot get the modem to work. The system is > unable to detect the modem and when I tell it that it's /dev/ttyS2 it > can't find anything. I suspect the problem is an incorrect IRQ. I've > looked at /proc/<can't remember>/serial and it looks like ttyS2 is set > to IRQ4 when the modem is on IRQ5. Everything I've found on the web > says to use setserial to set the correct parameters for the serial > ports. But setserial isn't there on my system. Any suggestions? > > Thanks > > > > >------------------------------------------------------------------------ > >Want to buy your Pack or Services from MandrakeSoft? >Go to http://www.mandrakestore.com > > message.footer > > Content-Type: > > text/plain > Content-Encoding: > > 8bit > >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
