On 10 May 2002 16:42 EEST you wrote:

> Hi Robin,
> 
> > I suspect the freeze problem I mentioned earlier is to do with IRQ conflicts, 
> > but how do I change IRQs?  I've looked up every configuration tool I can find 
> > (Control Centre, linuxconf, webmin) and couldn't find anything that allows me 
> > to assign IRQs, or indeed do much at all to my hardware profile.
> 
> When using Linux IRQ assigning is handled by the BIOS, so your only
> chance would be to try and reserve IRQs there (e.g. for Legacy ISA
> devices) which then frees up and the IRQs rearrange.
> Another option might be to physically reseat the cards in the slots,
> however I am not sure if it has any effect when BIOS is handling the
> IRQs.

Hmm, this probably isn't my problem, then, since this hardware worked fine on 8.0, 
so the IRQs should be the same in 8.2.  I'm surprised this hasn't come up in the 
errata, since 
I don't think there's anything weird about my hardware.  In case it rings any bells, 
here's the full spec 


Pentium II-MX 350 MHz
128 MB RAM
Creative CDROM CD4020E
GeForce 2 MX/400
Intel 82371AB/EB PCI bus master
Intel 82371AB/EB PCI to ASI bridge
Intel 82443BX processor to AGP controller
Intel 82443BX processor to PCI bridge
Award PCI BIOS
Cirrus Logic internal modem (not detected because)
Inca external modem
CE motherboard
Creative AWE64 soundcard
Creative Wavetable (configuration later removed with kudzu)

BTW, these freezes only seem to be happening when I'm online.

Sir Robin

Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to