Op Sunday 02 June 2002 21:01, schreef u:
this is my lilo.conf file and hdc is my DVD drive , i already put the 
ide-scsi relation but still in my /dev directory there is only the scd0 link 
from my cd-rw , even after a reboot . I understand correct that this second 
scdx link should be created automaticaly ??

Bart

boot=/dev/hda
map=/boot/map
install=/boot/boot.b
default=linux
keytable=/boot/be2-latin1.klt
lba32
prompt
nowarn
timeout=100
message=/boot/message
menu-scheme=wb:bw:wb:bw
image=/boot/vmlinuz
        label=linux
        root=/dev/hda1
        initrd=/boot/initrd.img
        append="devfs=mount hdd=ide-scsi hdc=ide-scsi nobiospnp quiet"
        vga=788
        read-only
image=/boot/vmlinuz
        label=linux-nonfb
        root=/dev/hda1
        initrd=/boot/initrd.img
        append="devfs=mount hdd=ide-scsi hdc=ide-scsi nobiospnp"
        read-only
image=/boot/vmlinuz
        label=failsafe
        root=/dev/hda1
        initrd=/boot/initrd.img
        append="devfs=nomount hdd=ide-scsi failsafe"
        read-only
other=/dev/fd0
        label=floppy
        unsafe



> On Sun, 2 Jun 2002 20:40:41 +0200
>
> Bart Salien <[EMAIL PROTECTED]> wrote:
> > Op Sunday 02 June 2002 00:42, schreef u:
> > I have the same problems with my DVD reader under Xcdroast , there are
> > some previous mailings about this subject that say you should let this
> > reader work a a scsi emulated drive , i couldn 't get it to work .
> > So i can 't realy help you , it might give you an ide if your not as
> > newbie as i am.
>
> For either a cdrom or a dvd You must add hdx=ide-scsi for that drive to
> lilo append.
> Xcdroast or any other burning program will then be able to 'see ' the
> drive.
> Adding the scsi emulation Will change the mt point for that drive and
> any other removals which follow it on the chain.
>
> Example:
> cdrom/dvd-master-hdc-/mnt/cdrom will become /mnt/scd0
> cdrw     -slave -hdd-/mnt/scd0 will become /mnt/scd1
>
> Additionally with a dvd linkage will need to be changed in order to
> access thru any dvd player.
> From example above the following would need to be entered
> # ln -s scd0 /dev/dvd
>
>
>     Charles

Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to