On Tuesday 18 June 2002 10:17 am, you wrote: > > Athlon Socket-A Ali Chipset, DDR/SDRAM support. My son-in-law said to > > stay away from Duron. It sounds like many of you use Duron though without > > a problem. The Jetway 830CF is being offered for 229.00 I believe while > > the > > I have an Athlon as well, but many people say Duron runs fine. The big > difference between the two is that the Duron lacks the secondary cache, > and therefore is going to run slower. Even so, it's a good step up from > a Pentium II. > > Tou'll probably be better off with the Athlon in the long run - but > typically, memory is more important than processor speed, so for example > a duron with 512 megs is a better investment than an athlon with 256. > > Also, you may not need such a fast athlon - you might be able to obtain > a slower speed one at reduced cost. Usually when manufacturers make a > set of cpus at different speeds, the really higher speed versions are > way off scale in price -- they are far more expensive than the increase > in speed would warrant. (You might pay 50% more for 5% increase in > speed.) After a while those prices settle, and sometimes the best choice > is a cpu with a speed of just a little bit less than the highest speed > available - say for instance a 1400 in your situation. > > FWIW I got a 1000 mhz athlon, but that was back in March of 2001. I'm sure > prices have gotten much lower :(.
Dear All, Thank you all for your help with my upgrading. I am tossing back and forth between the Jetway 830CF barebones with Athlon XP 1500 and another barebones, Biostart M7VkQ Socket-A XP BRD with Audio/Video and Athlon XP 1600. The Biostar one has a Trident Blade 3D Video Integrated. Does this video card work well with LM 8.2? According to Civileme the Jetway system works well with LM8.2. Thanks for any help here. Sincerely, Marcia
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
