Uite aici un exemplu aproape de ceea ce cauţi tu, dar îţi recomand să încerci
uneltele de configurare ale X-ului (xf86config şi xf86cfg, parcă) înainte de a
te apuca de editare şi 'fine tuning'
/io, umil posesor de S3 ViRGE /DX 4MB şi AOC Spectrum 7GLR
--
. | |
|^)|_/(/ |^)()|(|()\/(||)
'
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "XScreen" 0 0
InputDevice "Genius" "CorePointer"
InputDevice "BTC" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/ISO8859-2/misc:unscaled"
FontPath "/home/x-files/fonts/jmk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
# FontPath "/usr/share/fonts/default/Type1"
# FontPath "/usr/share/fonts/ISO8859-2/Type1"
# FontPath "/usr/share/AbiSuite/fonts"
FontPath "/home/x-files/fonts/truetype"
FontPath "/home/x-files/fonts/truetype.mine"
# FontPath "/home/x-files/fonts/truetype.more"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
Option "BlankTime" "13"
Option "StandbyTime" "30"
Option "SuspendTime" "45"
Option "OffTime" "60"
EndSection
Section "Module"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
# Load "glx"
# Load "pex5"
# Load "record"
# Load "xie"
Load "type1"
Load "speedo"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "BTC"
Driver "keyboard"
Option "XkbDisable" "false"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
# Option "XkbLayout" "ro"
# Option "XkbCompat" "default"
# Option "XkbSymbols" "us(pc101)"
# Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Genius"
Driver "mouse"
Option "Protocol" "IntelliMouse"
Option "Device" "/dev/mouse"
Option "Resolution" "400"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Spectrum7Glr"
VendorName "AOC"
ModelName "a790"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 160.0
Option "dpms"
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 85 Hz, 76.0 kHz hsync
Modeline "1152x864" 135.00 1152 1328 1456 1748 864 868 880 908
# 1024x768 @ 100Hz, 80.21 kHz hsync
# Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1152x864 @ 95 Hz, 89.62 kHz hsync
# Modeline "1152x864" 137.65 1152 1216 1344 1573 864 874 893 922 -HSync -VSync
# 1280x960 @ 85 Hz
# Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +Hsync
+Vsync
EndSection
Section "Device"
Identifier "Eagle"
Driver "s3virge"
VendorName "S3"
BoardName "ViRGE/DX or /GX"
ChipSet "virge dx"
BusID "PCI:0:5:0"
VideoRam 4096
Option "UseFB" "yes"
Option "pci_burst" "yes"
Option "pci_retry" "yes"
Option "hw_cursor" "yes"
Option "set_mclk" "60.114 M"
Option "early_ras_precharge"
Option "fifo_aggressive"
# Option "fifo_moderate"
# Option "fifo_conservative"
# Option "slow_edoram"
# Option "NoAccel"
# Option "xaa_benchmark"
EndSection
Section "Screen"
Identifier "XScreen"
Device "Eagle"
Monitor "Spectrum7Glr"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480" "512x384"
ViewPort 0 0
EndSubsection
EndSection
În data de 2001.05.02 18:14 Costea Iulian a scris:
>
>
>
> Cum reusesc sa configurez o placa S3 de 2M si
> un monitor AOC
> in redhat 7.0, ca nu mai exista xfree86
> iar utilitarul nou nu da rezultate.
> Ce fisiere trebuie sa editez si cum , ca sa nu bajbai asa de nebun.
> Merci.
>
>
>
>
> ------------------------------
> K Free E-mail http://www.k.ro/
> by KappaNet http://www.kappa.ro/
>
>
>
>
