Dnia środa, 27 kwietnia 2005 21:59, gary napisał: > Michał Woźniak wrote: > >>I had the same problem with the same drive, but using a GA-08IPE Pro 2 > >>motherboard. Had to re-open the box, reseat *all* the cables and leads > >>etc. and finally had to reset the CMOS to get past firt stage install. > >>Note that over the years I've found that any Linux distribution, not > >>just Mandy, is more sensitive to hadrware failure or error and will > >>throw up warnings fairly pronto. Unlike Windows XX, which will blunder > >>along until you get a catastrophic failure. HTH. > > > > Thanks, I'll give it a try. Man, when I think about opening the box and > > doing all this stuff... But "you gotta do what you gotta do"... :) > > Aw, c'mon. It ain't that hard ;)
Nope, it ain't, but it is *that* boring and time-consuming. :) Frankly, I'd prefer to sit in front of the console and try to somehow hack the problem rather than sit and re-connect all the cables. I think you understand. ;) Anyway, as I said - I'll give it a try and report back here, in case somebody would lokk for the solution of the same problem. Cheers Mike
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
