On Wednesday 26 April 2006 08:24 pm, Chris Climbed A Telegraph Pole and
Clicked:
> I guess thats what they're called, borrowed one from a friend today to see
> if it would work on my 10.1 setup. Plugged it in and it mounted right off
> the bat. I was looking at my hourly log snip a bit ago and noticed this:
>
> Apr 26 17:10:19 localhost kernel: usb 5-7: USB disconnect, address 2
> Apr 26 17:10:19 localhost kernel: scsi0 (0:0): rejecting I/O to device
> being removed
> Apr 26 17:10:19 localhost kernel: Buffer I/O error on device sda1, logical
> block 509
> Apr 26 17:10:19 localhost kernel: lost page write due to I/O error on sda1
> Apr 26 17:10:19 localhost kernel: scsi0 (0:0): rejecting I/O to device
> being removed
> Apr 26 17:10:19 localhost kernel: Buffer I/O error on device sda1, logical
> block 2749
> Apr 26 17:10:19 localhost kernel: lost page write due to I/O error on sda1
> Apr 26 17:10:19 localhost kernel: Buffer I/O error on device sda1, logical
> block 2750
> Apr 26 17:10:19 localhost kernel: lost page write due to I/O error on sda1
> Apr 26 17:10:19 localhost kernel: Buffer I/O error on device sda1, logical
> block 2751
> Apr 26 17:10:19 localhost kernel: lost page write due to I/O error on sda1
> Apr 26 17:10:19 localhost kernel: Buffer I/O error on device sda1, logical
> block 2752
> Apr 26 17:10:19 localhost kernel: lost page write due to I/O error on sda1
> Apr 26 17:10:20 localhost perl: drakupdate_fstab called with --auto
> --del /dev/sda1
>
> Anyone know what this is telling me? Plugging it in again just now shows
> no problems:
>
> Apr 26 20:17:14 localhost kernel: usb 5-8: new high speed USB device using
> address 4
> Apr 26 20:17:14 localhost kernel: scsi2 : SCSI emulation for USB Mass
> Storage devices
> Apr 26 20:17:14 localhost kernel: Vendor: SanDisk Model: Cruzer Mini
> Rev: 0.2
> Apr 26 20:17:14 localhost kernel: Type: Direct-Access
> ANSI SCSI revision: 02
> Apr 26 20:17:14 localhost kernel: SCSI device sda: 501759 512-byte hdwr
> sectors (257 MB)
> Apr 26 20:17:14 localhost kernel: sda: Write Protect is off
> Apr 26 20:17:14 localhost kernel: sda: Mode Sense: 03 00 00 00
> Apr 26 20:17:14 localhost kernel: sda: assuming drive cache: write through
> Apr 26 20:17:14 localhost kernel: /dev/scsi/host2/bus0/target0/lun0: p1
> Apr 26 20:17:14 localhost kernel: Attached scsi removable disk sda at
> scsi2, channel 0, id 0, lun 0
> Apr 26 20:17:14 localhost kernel: USB Mass Storage device found at 4
> Apr 26 20:17:15 localhost scsi.agent[20276]: disk
> at /devices/pci0000:00/0000:00:10.4/usb5/5-8/5-8:1.0/host2/2:0:0:0
> Apr 26 20:17:15 localhost perl: drakupdate_fstab called with --auto
> --add /dev/sda1
> Apr 26 20:19:08 localhost fetchmail[26857]: awakened at Wed Apr 26 20:19:08
> 2006
> Apr 26 20:19:12 localhost kernel: end_request: I/O error, dev fd0, sector 0
> Apr 26 20:19:12 localhost last message repeated 5 times
> Apr 26 20:21:11 localhost fetchmail[26857]: awakened at Wed Apr 26 20:21:11
> 2006
> Apr 26 20:21:21 localhost kernel: usb 5-8: USB disconnect, address 4
> Apr 26 20:21:21 localhost perl: drakupdate_fstab called with --auto
> --del /dev/sda1
>
> The only difference is that I tried it in two different usb ports. Could
> the first snip possibly point to a bad usb port?
It is possible. My guess though, is that you have 2 types of usb ports on
your pc. usb 1 and usb 2 essentially. usb 1 may be good for low end things.
(mice / keyboards) but not for other things such as camara's or high tech
joysticks.
Hope this helps
benja22
--
Old MacDonald had an agricultural real estate tax abatement.
____________________________________________________
Want to buy your Pack or Services from Mandriva?
Go to http://store.mandriva.com
Join the Club : http://www.mandrivaclub.com
____________________________________________________
