You can try one of the following 3 fixes (use XFree86 4.1.0 for these)
Use the ChipID option to forcibly mis-ID the chip as a known type
Add an entry for the chip to xf86PciInfo.h and r128_probe.c, and recompile X
(you'll need the sources, obviously)
Check out the latest CVS code and build it. This will almost certainly give
you an entry for this card, but there may be bugs in the new code (there may
also be fixes for existing bugs...)
> -----Original Message-----
> From: Eric [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 04, 2001 10:25 AM
> To: [EMAIL PROTECTED]
> Subject: [Newbie]ATI Xpert 2000
>
>
> Hello,
>
> I have an XPERT 2000 with Xfree 4.0.3 (xfree 4.1.0 is the
> same problem)
>
> I cannot configure X server and i have the message :
> XFree86 has found a valid card configuration.
> Unfortunately the appropriate data has not been added to
> xf86PciInfo.h.
> Please forward 'scanpci -v' output to XFree86 support team.
>
> And xfree86 -scanpci -v tell me:
> Probing for PCI devices (Bus:Device:Function)
>
> (0:0:0) unknown chip (DeviceId 0x0305) from VIA
> (0:1:0) unknown chip (DeviceId 0x8305) from VIA
> (0:7:0) VIA card using a VIA VT 82C686 MVP4 ISA Bridge
> (0:7:1) VIA VT 82C586 MVP3 IDE Bridge
> (0:7:2) unknown card (0x0925/0x1234) using a VIA VT 82C586 MVP3 USB
> Controller
> (0:7:3) unknown card (0x0925/0x1234) using a VIA VT 82C586 MVP3 USB
> Controller
> (0:7:4) VIA VT 8501 MVP4 ACPI Bridge
> (0:7:5) unknown card (0x1462/0x3300) using a VIA VT 8501 MVP4
> MultiMedia
>
> (0:12:0) 3COM unknown card (0x1000) using an unknown chip (DeviceId
> 0x9200) from
> 3COM
> (1:0:0) ATI card using an unknown chip (DeviceId 0x5446) from ATI
>
> ----------
>
> How can I solve my problem ?
> Thanks for your help ...
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
