Hi,
You do realise that you are not using the S3 driver
but the standard "vga" drive (Device "Display1" in
your Section "Screen" instead of Device "Standard
VGA" *why did you call them that way!!??!! which would
use driver "s3virge") the standard vga driver does not
support 16 bit depth which is your default in the
screen section...
Cleanup your XF86Config.new by
1. giving reasonable names to your devices (for
instance setting the vga driver in the standard vga
device)
2. checkin the figures for your monitor, unless it is
a flat screen I suspect the HorizSync may not be what
it should (look at the specs)
And 3. selecting as device in the screen section the
one which has the s3virge driver.
Whether that driver is OK for the S3 Trio 66 I don't
know at worse use the vesa driver to get started and
work your way from there to the accelerated driver
which works for your card...
hope that helps
Lionel
--- Keneth <[EMAIL PROTECTED]> wrote:
> Have installed 4.1.0 but encounter
>
> "AddScreen/ScreenInit failed for driver 0 "
>
> error
>
> Using Redhat 7.1 with on board S3 Trio 66 display
>
> Any idea?
> Keneth
>
> Xf86Config
> ========
> # File generated by xf86config.
>
> #
> # Copyright (c) 1999 by The XFree86 Project, Inc.
> #
> # Permission is hereby granted, free of charge, to
> any person obtaining a
> # copy of this software and associated documentation
> files (the "Software"),
> # to deal in the Software without restriction,
> including without limitation
> # the rights to use, copy, modify, merge, publish,
> distribute, sublicense,
> # and/or sell copies of the Software, and to permit
> persons to whom the
> # Software is furnished to do so, subject to the
> following conditions:
> #
> # The above copyright notice and this permission
> notice shall be included in
> # all copies or substantial portions of the
> Software.
> #
> # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
> OF ANY KIND, EXPRESS OR
> # IMPLIED, INCLUDING BUT NOT LIMITED TO THE
> WARRANTIES OF MERCHANTABILITY,
> # FITNESS FOR A PARTICULAR PURPOSE AND
> NONINFRINGEMENT. IN NO EVENT SHALL
> # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM,
> DAMAGES OR OTHER LIABILITY,
> # WHETHER IN AN ACTION OF CONTRACT, TORT OR
> OTHERWISE, ARISING FROM, OUT OF
> # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> OTHER DEALINGS IN THE
> # SOFTWARE.
> #
> # Except as contained in this notice, the name of
> the XFree86 Project shall
> # not be used in advertising or otherwise to promote
> the sale, use or other
> # dealings in this Software without prior written
> authorization from the
> # XFree86 Project.
> #
>
> #
>
**********************************************************************
> # Refer to the XF86Config(4/5) man page for details
> about the format of
> # this file.
> #
>
**********************************************************************
>
> #
>
**********************************************************************
> # Module section -- this section is used to
> specify
> # which dynamically loadable modules to load.
> #
>
**********************************************************************
> #
> Section "Module"
>
> # This loads the DBE extension module.
>
> Load "dbe" # Double buffer extension
>
> # This loads the miscellaneous extensions module,
> and disables
> # initialisation of the XFree86-DGA extension within
> that module.
> SubSection "extmod"
> Option "omit xfree86-dga" # don't
> initialise the DGA extension
> EndSubSection
>
> # This loads the Type1 and FreeType font modules
> Load "type1"
> Load "freetype"
>
> # This loads the GLX module
> # Load "glx"
>
> EndSection
>
> #
>
**********************************************************************
> # Files section. This allows default font and rgb
> paths to be set
> #
>
**********************************************************************
>
> Section "Files"
>
> # The location of the RGB database. Note, this is
> the name of the
> # file minus the extension (like ".txt" or ".db").
> There is normally
> # no need to change the default.
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
> # Multiple FontPath entries are allowed (which are
> concatenated together),
> # as well as specifying multiple comma-separated
> entries in one FontPath
> # command (or a combination of both methods)
> #
> # If you don't have a floating point coprocessor and
> emacs, Mosaic or other
> # programs take long to start up, try moving the
> Type1 and Speedo directory
> # to the end of this list (or comment them out).
> #
>
> FontPath "/usr/X11R6/lib/X11/fonts/local/"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath
> "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> FontPath
> "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
>
> # The module search path. The default path is shown
> here.
>
> # ModulePath "/usr/X11R6/lib/modules"
>
> EndSection
>
> #
>
**********************************************************************
> # Server flags section.
> #
>
**********************************************************************
>
> Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot
> where a signal is
> # received. This may leave the console in an
> unusable state, but may
> # provide a better stack trace in the core dump to
> aid in debugging
>
> # Option "NoTrapSignals"
>
> # Uncomment this to disable the <Crtl><Alt><BS>
> server abort sequence
> # This allows clients to receive this key event.
>
> # Option "DontZap"
>
> # Uncomment this to disable the
> <Crtl><Alt><KP_+>/<KP_-> mode switching
> # sequences. This allows clients to receive these
> key events.
>
> # Option "Dont Zoom"
>
> # Uncomment this to disable tuning with the xvidtune
> client. With
> # it the client can still run and fetch card and
> monitor attributes,
> # but it will not be allowed to change them. If it
> tries it will
> # receive a protocol error.
>
> # Option "DisableVidModeExtension"
>
> # Uncomment this to enable the use of a non-local
> xvidtune client.
>
> # Option "AllowNonLocalXvidtune"
>
> # Uncomment this to disable dynamically modifying
> the input device
> # (mouse and keyboard) settings.
>
> # Option "DisableModInDev"
>
> # Uncomment this to enable the use of a non-local
> client to
> # change the keyboard or mouse settings (currently
> only
=== message truncated ===
__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
