Hi all!


I have a problem setting up Xfree86 4.1.0 to work
with 2 cards. (Mandrake 8.1 RC1)

My Matrox Mystique is working fine under X but how do
I get my second card (Dragon 3000, (3dfx,voodo2,12Mb))
to work with the same X configuration???

An example conf would be great!

I haven't figured out how to solve this issue.
I believe I'm supposed to load the tdfx driver, but
how? (/etc/X11/XF86Config-4?)

Here is some info about the 3dfx card.

output from scanpci
----------------------
....
pci bus 0x0 cardnum 0x09 function 0x0000: vendor
0x102b device 0x051a
 Matrox MGA 1064SG

pci bus 0x0 cardnum 0x0b function 0x0000: vendor
0x121a device 0x0002
 3dfx Interactive Voodoo2
....

output from scanpci -v
------------------------
....
pci bus 0x0 cardnum 0x09 function 0x0000: vendor
0x102b device 0x051a
 Matrox MGA 1064SG
 CardVendor 0xffff card 0xffff (Card unknown)
  STATUS    0x0280  COMMAND 0x00a7
  CLASS     0x03 0x00 0x00  REVISION 0x02
  BIST      0x00  HEADER 0x00  LATENCY 0x40  CACHE
0x00
  BASE0     0xe0000000  addr 0xe0000000  MEM
  BASE1     0xe1000008  addr 0xe1000000  MEM
PREFETCHABLE
  BASE2     0xe2000000  addr 0xe2000000  MEM
  BASEROM   0xe3000000  addr 0xe3000000 
not-decode-enabled
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE
0x0a
  BYTE_0    0x5f0f4f21  BYTE_1  0x00  BYTE_2 
0x806d640  BYTE_3  0xffffffff

pci bus 0x0 cardnum 0x0b function 0x0000: vendor
0x121a device 0x0002
 3dfx Interactive Voodoo2
  STATUS    0x0080  COMMAND 0x0002
  CLASS     0x04 0x00 0x00  REVISION 0x02
  BASE0     0xe4000008  addr 0xe4000000  MEM
PREFETCHABLE
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x00  INT_LINE
0xff
  BYTE_0    0x14000  BYTE_1  0x00  BYTE_2  0x806d9b8 
BYTE_3  0xffffffff
....

output from pcimodules
-----------------------
matroxfb_base
sonypi
usb-uhci
uhci


- XFree86-glide-module-4.1.0-15mdk.i586.rpm is
installed




__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger. 
http://im.yahoo.com
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

Reply via email to