|
Hello, I’ve installed Caldera OpenLinux 2.3 on an HP
NETSERVER LC2000. However, when running the kde
environment, it is too large for the size monitor I have. The
icons are about ~1000x larger then their actual size for the screen. The interesting thing is that I have also installed this
same version of linux on Compaq Prolinea with a Cirrus CL-5434 card and I was
able to use the�
XF86Config.vga file to resolve the screen issues that I had and
the kde now work great or a least is viewable on that particular monitor which
is a Compaq 151F5. The HP LC2000 comes with an ATI 3D RAGE IIC graphics card
and seems to be working fine except for the sizing problem. I’ve
tried setting the dpi to 75 in the xservers file and setting the font priority
in the XF86Config file with the same results. Also,
when modifying the XF86Config, no changes are affecting the very large font
size for the kde icons and text. Is there anywhere else I can check for this type of setting
and or problem? ��Any
help would be greatly appreciated. Thanks in advance, Frank Following is the output from running the ked command: XFree86
Version 3.3.4 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release
Date: ����� If the server is older than 6-12 months,
or if your card is newer ����� than the above
date, look for a newer version before reporting ����� problems.� (see
http://www.XFree86.Org/FAQ) Operating
System: Linux 2.2.10 i686 [ELF] Configured
drivers: � SVGA: server for SVGA graphics adaptors
(Patchlevel 0): ����� NV1, STG2000, RIVA 128, RIVA TNT, RIVA
TNT2, RIVA ULTRA TNT2, ����� RIVA VANTA, RIVA ULTRA VANTA, RIVA
INTEGRATED, ET4000, ET4000W32, ����� ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ����� ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ����� ET4000W32p_rev_d, ET6000, ET6100, et3000,
pvga1, wd90c00, wd90c10, ����� wd90c30, wd90c24, wd90c31, wd90c33, gvga,
ati, sis86c201, sis86c202, ����� sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, ����� sis620, tvga8200lx, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, ����� tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, ����� tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, ����� tgui9680, tgui9682, tgui9685, cyber9382,
cyber9385, cyber9388, ����� cyber9397, cyber9520, cyber9525,
3dimage975, 3dimage985, cyber9397dvd, ����� blade3d, cyberblade, clgd5420, clgd5422,
clgd5424, clgd5426, clgd5428, ����� clgd5429, clgd5430, clgd5434, clgd5436,
clgd5446, clgd5480, clgd5462, ����� clgd5464, clgd5465, clgd6205, clgd6215,
clgd6225, clgd6235, clgd7541, ����� clgd7542, clgd7543, clgd7548, clgd7555,
clgd7556, ncr77c22, ncr77c22e, ����� cpq_avga, mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag200, ����� mgag100, mgag400, oti067, oti077, oti087,
oti037c, al2101, ali2228, ����� ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, ����� video7, ark1000vl, ark1000pv, ark2000pv,
ark2000mt, mx, realtek, ����� s3_virge, AP6422, AT24, AT3D, s3_svga,
NM2070, NM2090, NM2093, NM2097, ����� NM2160, NM2200, ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ����� ct65546, ct65548, ct65550, ct65554,
ct65555, ct68554, ct69000, ����� ct64200, ct64300, mediagx, V1000, V2x00,
p9100, spc8110, i740, ����� i740_pci, Voodoo Banshee, Voodoo3,
generic (using VT number 8) XF86Config:
/etc/XF86Config (**)
stands for supplied, (--) stands for probed/default
values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 (**) SVGA: Graphics device ID: "Primary Card" (**) SVGA: Monitor ID: "Primary Monitor" (--) SVGA: Invalid vertical timing for mode "320x204". Deleted. (**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/share/ghostscript/5.10/fonts" (--) SVGA: PCI: Unknown vendor (0x15ad) Unknown chipset
(0x0405) rev 0, Memory @ 0xfc000000, 0xfb000000, I/O @ 0x10c0 (--) SVGA: chipset:�
generic (--) SVGA: videoram: 64k (**) SVGA: clocks:� 25.18 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Using builtin driver modes (--) SVGA: Builtin Mode: 320x200 (--) SVGA: Virtual resolution set to 320x204 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 maudio: Cannot open audio device. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. PID
could not get read. kwmsound: Failed connecting the audio server. Please
check manually if you can start kaudioserver. waiting for X server to shut down |
