Hello,
I just recently installed XFree86 4.1.0 on FreeBSD 4-3-Release. It
installed successfully, I had it link all the necessary library files in
the install. I didn't however, create a link for rstartd which it says
in the Install documentation is not necessary. This is on an HP machine
with an Intel 810. Here is the output of the XFree86.0.log file. It
shows up with two errors in it. The lines "(EE) Unable to open
/dev/agpgart (Device not configured)" and "Fatal server error:
AddScreen/ScreenInit failed for driver 0" are of interest. Any help
would be greatly appreciated. Thanks in advance.
Script started on Mon Oct 8 10:39:24 2001
> startx
xauth: creating new authority file /home/cstrzelc/.Xauthority
xauth: creating new authority file /home/cstrzelc/.Xauthority
xauth: (argv):1: bad display name "freebsd1.gltg.com:0" in "list"
command
xauth: (argv):1: bad display name "freebsd1.gltg.com:0" in "add"
command
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 4.2-STABLE i386 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct 8 10:39:27 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "TekBright"
(**) | |-->Device "Intel810"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "dell101"
(**) XKB: layout: "us"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11
R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscal
ed,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr
/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:1:0) Intel i810 rev 3, Mem @ 0xf8000000/26, 0xf4000000/19
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815
(--) Assigning device section with no busID to primary device
(--) Chipset i810 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) I810(0): initializing int10
(==) I810(0): Write-combining range (0xa0000,0x20000) was already clear
(==) I810(0): Write-combining range (0xf0000,0x10000)
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(--) I810(0): Chipset: "i810"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xF4000000
(EE) Unable to open /dev/agpgart (Device not configured)
(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): TekBright: Using hsync range of 31.50-64.30 kHz
(II) I810(0): TekBright: Using vrefresh range of 50.00-120.00 Hz
(II) I810(0): Clock range: 12.00 to 136.00 MHz
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) I810(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) I810(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(==) I810(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(==) Depth 24 pixmap format is 32 bpp
(==) I810(0): Write-combining range (0xf4000000,0x80000) was already
clear
(==) I810(0): Write-combining range (0xf8000000,0x4000000)
(==) I810(0): Write-combining range (0xa0000,0x10000) was already clear
(II) I810(0): Setting dot clock to 36.0 MHz [ 0x10 0x1 0x40 ] [ 18 3 4 ]
(II) I810(0): chose watermark 0x2210c000: (tab.freq 36.0)
Fatal server error:
AddScreen/ScreenInit failed for driver 0
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
X connection to :0.0 broken (explicit kill or server shutdown).
xauth: (argv):1: bad display name "freebsd1.gltg.com:0" in "remove"
command
> exit
exit
Script done on Mon Oct 8 10:39:37 2001
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
