why don't you try removing the unwanted resolutions from your modes line... I assume you know also about Ctrl Alt numeric pad + and Ctrl Alt numeric pad - Lionel --- Kevin O <[EMAIL PROTECTED]> wrote: > Hello all, > > I have a Trident CyberBlade XP on a Toshiba laptop, and I've almost got the > X configuration correct, except I want the resolution a little bigger. > Right now 1024x768 comes up fine, but still doesn't fully fit my > screen....I've tried to put other resolutions in front of 1024x768, but they > do not take effect. Below is my XF86Config file. > > Any suggestions? > > Thanks, > Kevin > > > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/CID/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/tt/" > EndSection > > Section "Module" > Load "freetype" > Load "type1" > Load "speedo" > Load "bitmap" > Load "dbe" > Load "dri" > Load "extmod" > Load "glx" > Load "pex5" > Load "record" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "PS/2" > Option "Device" "/dev/mouse" > Option "Emulate3Buttons" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > HorizSync 30-65 > VertRefresh 50-90 > # Mode "1024x768" > # # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz > # DotClock 78.654 > # HTimings 1024 1056 1184 1312 > # VTimings 768 772 776 792 > # Flags "-HSync" "-VSync" > # EndMode > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "SWcursor" # [<bool>] > #Option "PciRetry" # [<bool>] > #Option "NoAccel" # [<bool>] > #Option "SetMClk" # <freq> > #Option "MUXThreshold" # <i> > Option "ShadowFB" # [<bool>] > #Option "Rotate" # [<str>] > #Option "VideoKey" # <i> > #Option "NoMMIO" # [<bool>] > #Option "NoPciBurst" # [<bool>] > #Option "MMIOonly" # [<bool>] > #Option "CyberShadow" # [<bool>] > #Option "CyberStretch" # [<bool>] > Identifier "Card0" > Driver "trident" > VendorName "Trident" > BoardName "Cyber/BladeXP" > Chipset "cyberbladeXPm" > BusID "PCI:1:0:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 16 > SubSection "Display" > Depth 1 > EndSubSection > SubSection "Display" > Depth 4 > EndSubSection > SubSection "Display" > Depth 8 > EndSubSection > SubSection "Display" > Depth 15 > EndSubSection > SubSection "Display" > Depth 16 > Modes "1400x1050" "1280x1024" "1024x768" "800x600" > EndSubSection > SubSection "Display" > Depth 24 > EndSubSection > SubSection "Display" > Depth 32 > EndSubSection > EndSection > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp > > _______________________________________________ > Newbie mailing list > [EMAIL PROTECTED] > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
