Hello, Matt your advice and sample helped me greately. That config worked fine for my ATI Rage Fury Pro/Xpert 2000 Pro(AGP) with 16M on it:
Section "Device" Identifier "ATI Xpert2000" VendorName "ATI" BoardName "ATI Xpert2000" Chipset "ATI Rage 128 RF (AGP)" Driver "r128" Option "AGPMode" "2" Option "UseCCEFor2D" "true" VideoRam 16384 EndSection Thank you, Alexei > Alexei, > > I could be off base here, but you might have a problem similar to what I had > with the Xpert 2000 (not Xpert 2000 Pro). I have a web page that describes > how to set up the Xpert 2000, because it is a common question on this list > (http://two.ucdavis.edu/~holland/unix/xpert2000.html). It sounds like you > have a slightly different card, but there's a chance that the same general > approach might work. It is also possible, as another person mentioned, that > a more recent version of X might do the trick. > > Good luck, > Matt _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
