Hi all,
I have had this problem with XFree86 4.2 and 4.1. I will include full server and other
diagnostics, the Xfree86 log file and config file I will include as attachments, if
they are rejected then I will resend the email with contents in the mail itself. Wh
at happens is I change between virtual terminals with ctrl+alt+Funtionkey and X dies
with :
pgetbl_ctl: 0x7e00001 pgetbl_err: 0x1ac49000
ipeir: 0 iphdr: 0
LP ring tail: 8 head: 0 len: 0 start 0
eir: 0 esr: 0 emr: 3d
instdone: ff7b instpm: 0
memmode: 4 instps: 0
hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0
space: 65520 wanted 65528
Fatal server error:
lockup
I am using the Intel 810 chipset as my graphics card. I have also been experiencing
segfaults with XFree86 4.1.0 when the machine is under heavy load but I do not have a
log entry handy, if it happens with 4.2.0 then I will send that log output as well.
Regards, Fred.
Here follows some information on my system and configuration :
lspci :
00:00.0 Host bridge: Intel Corp. 82810E GMCH [Graphics Memory Controller Hub] (rev 03)
00:01.0 VGA compatible controller: Intel Corp. 82810E CGC [Chipset Graphics
Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
01:08.1 Input device controller: Creative Labs SB Live! (rev 07)
01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 78)
/proc/interrupts:
CPU0
0: 24798137 XT-PIC timer
1: 37663 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 1116914 XT-PIC eth0
10: 3379475 XT-PIC EMU10K1
11: 0 XT-PIC usb-uhci
12: 355207 XT-PIC PS/2 Mouse
14: 283584 XT-PIC ide0
15: 41891 XT-PIC ide1
NMI: 0
ERR: 0
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
dcd0-dcdf : Intel Corp. 82801AA SMBus
e000-efff : PCI Bus #01
ec00-ec7f : 3Com Corporation 3c905C-TX [Fast Etherlink]
ec00-ec7f : 01:0c.0
ecd8-ecdf : Creative Labs SB Live!
ece0-ecff : Creative Labs SB Live! EMU10k1
ece0-ecff : EMU10K1
ff80-ff9f : Intel Corp. 82801AA USB
ff80-ff9f : usb-uhci
ffa0-ffaf : Intel Corp. 82801AA IDE
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
