I would not try depth 32, 24 is fine. I have also had problems with the test during configuration, when I did not test everything went fine and X ran also fine after, you could try... I also ran into problems once with "Out of Frequency range" the signal was ** 1 Herz ** above the limit!!! you can try to specify a slightly lower range for your V. Freq... Lionel --- Arun <[EMAIL PROTECTED]> wrote: > I have a problem with starting X windows system. > > my comp config is > > P II 350 MHz > 96 MB SDRAM > 20 GB HDD (4GB to LINUX) > Trident 4MB AGP Display card > LG studioworks 563N 15'' Monitor > monitor specs - H. Freq - 30-61 kHz > V. Freq - 50-120 Hz > > my computer can do 1024x768@32bit color in Windows 98. > > I am not able to make these settings in linux 7.0 > > I tried Xconfigurator but no combination works out. > > The system correctly detects both the monitor and the AGP card but when i let it >test setting, > the system hangs. > The monitor displays "Out of Frequency range" error. > when i have specified the range of frequency why would the system produce out of >frequency > signal?? > if anyone can help out please mail me thanking you > arun >
__________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
