I have a small problem with XFree86 4.1.0: some programs that try to take
over the whole screen -- games, say -- mangle the display. I'd like to know
if I can fix it, or if this is a known problem that went away in 4.2.
I have
- an S3 ViRGE MX
- Red Hat 7.2, fully updated, including
- XFree86 3.3.6 from XFree86-SVGA-3.3.6-42.i386.rpm
- XFree86 4.1.0 from XFree86-4.1.0-15.i386.rpm
- XFree86-compat-modules-3.3.6-42.i386.rpm
- XFree86-devel-4.1.0-15.i386.rpm
- XFree86-libs-4.1.0-15.i386.rpm
- XFree86-tools-4.1.0-15.i386.rpm
I reproduce the problem with xmame compiled from an xmame-0.57.1-1 srpm
picked up on the net.
By default, the Red Hat installation configured my system to use XFree86
3.3.6. Under that setup, "xmame pang" (which emulates the game "Pang" in an
ordinary window) and "xmame -x11-mode 1 pang" (which takes over the whole
screen) both work just fine.
If I "telinit 3" to get rid of X, then "xinit -- /usr/X11R6/bin/XFree86 :0"
to start XFree86 4.1.0, "xmame pang" still works just fine, but
"xmame -x11-mode 1 pang" fails. The screen flashes black, as if xmame has
taken control, but then the screen resumes displaying the X desktop. The
display does not respond to mouse movements: I have focus-follows-mouse set,
but the (only) window on the desktop never receives focus. xmame is running:
it generates sound and responds to key presses, so I can quit the program.
When the program quits, the screen flashes black, then the desktop is
restored, the mouse is active and all is normal.
I tried adding 'Option "NoAccel"', then both 'Option "NoAccel"' and
'Option "NoUseFB"', to XF86Config-4. The symptoms didn't change.
I have attached a 4.1 log and the output of xinit for the 3.3.6 server.
I haven't tried this under XFree86 4.2.
In the past, I had similar problems with older versions of xmame and many
other games under Mandrake 7.2, which IIRC used XFree86 4.1 by default.
Often the screen would show "fat pixels" and repeated columns.
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: April 19, 2001
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520,
ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548,
ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300,
mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, i815, smi, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "intl"
(**) SVGA: Graphics device ID: "S3 ViRGE/MX (generic)"
(**) SVGA: Monitor ID: "Generic Laptop Display Panel 1024x768"
(--) SVGA: Mode "320x240" needs vert refresh rate of 75.14 Hz. Deleted.
(--) SVGA: Mode "400x300" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "480x300" needs vert refresh rate of 72.07 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1400x1050" needs hsync freq of 65.82 kHz. Deleted.
(--) SVGA: Mode "1400x1050" needs hsync freq of 77.04 kHz. Deleted.
(--) SVGA: Mode "1400x1050" needs hsync freq of 82.65 kHz. Deleted.
(--) SVGA: Mode "1400x1050" needs hsync freq of 93.88 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "1920x1200" needs hsync freq of 90.98 kHz. Deleted.
(**) FontPath set to "unix/:7100"
(--) SVGA: PCI: S3 ViRGE/MX rev 6, Memory @ 0xc0000000
(--) SVGA: S3V: ViRGE/MX rev 6, Linear FB @ 0xc0000000
(--) SVGA: Detected S3 ViRGE/MX
(--) SVGA: using driver for chipset "s3_virge"
(**) SVGA: videoram: 4096k
(--) SVGA: Ramdac speed: 135 MHz
(--) SVGA: assuming RefCLK value of 14.318 MHz
(--) SVGA: Detected current MCLK value of 83.045 MHz
(--) SVGA: LCD size 1024x768, clock 65.028 MHz
(--) SVGA: chipset: s3_virge
(**) SVGA: videoram: 4096k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 65.000
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: s3_virge: Using hardware cursor
restarting S3 graphics engine reset 1 ...
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE
polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
restarting S3 graphics engine reset 1 ...
restarting S3 graphics engine reset 1 ...
waiting for X server to shut down
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-15) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb 15 10:35:17 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "S3 ViRGE/MX (generic)"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "intl"
(**) XKB: layout: "intl"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 5333,8c01 card abcd,1100 rev 06 class 03,00,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac17 card 4000,0000 rev 02 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac17 card 4800,0000 rev 02 class 06,07,00 hdr 82
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:8:0) S3 ViRGE/MX rev 6, Mem @ 0xc0000000/26, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[1] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[2] -1 0x0000f300 - 0x0000f31f (0x20) IX[B]
[3] -1 0x00001100 - 0x0000110f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[1] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[2] -1 0x0000f300 - 0x0000f31f (0x20) IX[B]
[3] -1 0x00001100 - 0x0000110f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000f300 - 0x0000f31f (0x20) IX[B]
[10] -1 0x00001100 - 0x0000110f (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
S3VIdentify
(II) S3VIRGE: driver (version 1.6.0) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:08:0
S3VProbe begin
(--) Assigning device section with no busID to primary device
(--) Chipset virge mx found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0x0000f300 - 0x0000f31f (0x20) IX[B]
[10] -1 0x00001100 - 0x0000110f (0x10) IX[B]
S3VProbe end
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[7] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000f300 - 0x0000f31f (0x20) IX[B]
[13] -1 0x00001100 - 0x0000110f (0x10) IX[B]
[14] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
S3VPreInit 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
S3VGetRec
(**) S3VIRGE(0): Option "NoAccel"
(**) S3VIRGE(0): Option "NoUseFB"
(**) S3VIRGE(0): Option: NoAccel - Acceleration disabled
(==) S3VIRGE(0): Using HW Cursor
(**) S3VIRGE(0): Using cfb (not fb).
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. M5 BIOS
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.0
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: VBE 2.0
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) S3VIRGE(0): Chipset: "virge mx"
S3VMapMem
S3VEnableMmio
S3VPreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=40017000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level none
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 0 sec.
(II) S3VIRGE(0): VESA VBE DDC read failed
(--) S3VIRGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(II) S3VIRGE(0): I2C bus "I2C bus" initialized.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): assuming RefCLK value of 14.318 MHz
(--) S3VIRGE(0): Detected current MCLK value of 83.045 MHz
(--) S3VIRGE(0): LCD size 1024x768, clock 65.028 MHz
S3VDisableMmio
S3VPreInit minClock=20000, maxClock=270000
(II) S3VIRGE(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) S3VIRGE(0): Monitor0: Using vrefresh range of 40.00-70.00 Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x350" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "640x400" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "720x400" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806
-hsync -vsync
(==) S3VIRGE(0): DPI set to (75, 75)
(II) Loading sub module "cfb16"
(II) LoadModule: "cfb16"
(II) Loading /usr/X11R6/lib/modules/libcfb16.a
(II) Module cfb16: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "cfb"
(II) LoadModule: "cfb"
(II) Loading /usr/X11R6/lib/modules/libcfb.a
(II) Module cfb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "mfb"
(II) LoadModule: "mfb"
(II) Loading /usr/X11R6/lib/modules/libmfb.a
(II) Module mfb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xc0000000 - 0xc3ffffff (0x4000000) MS[B]
[1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[7] -1 0xc0000000 - 0xc3ffffff (0x4000000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000f300 - 0x0000f31f (0x20) IX[B]
[14] -1 0x00001100 - 0x0000110f (0x10) IX[B]
[15] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[16] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
S3VScreenInit
S3VMapMem
(==) S3VIRGE(0): Write-combining range (0xc0000000,0x400000)
S3VEnableMmio
S3VSave
(II) S3VIRGE(0): MMPR regs: ffffffff ffffffff ffffffff ffffffff
ViRGE driver: saved current video mode. Register dump:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
67
CR[00-2f]
5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 3f ff
9c 0e 8f 28 1f 96 b9 a3 ff ff ff ff ff ff ff ff
ff ff 00 ff 30 30 30 30 30 30 30 30 30 8c 01 06
SR[00-27]
03 00 03 00 02 05 06 07 06 5e 40 00 0c 50 00 00
43 72 84 6b 00 02 42 08 20 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f
CR[30-6f]
e1 05 40 81 00 00 7f 4b 4b a8 81 00 10 06 12 40
00 03 03 00 00 00 01 97 91 0d 00 ff ff ff c0 c0
00 00 00 08 00 00 00 00 43 c0 00 00 00 00 00 00
08 08 08 00 00 00 80 00 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
S3VModeInit
S3VModeInit dclk=65000
S3VInitSTREAMS
S3VWriteMode
S3VGEReset sub_stat=b000
restarting S3 graphics engine reset 1 ...
S3VGEReset sub_stat=b000
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
ef
CR[00-2f]
a3 7f 7f 86 83 94 24 f5 00 60 00 00 00 00 00 00
03 29 ff 00 00 ff 24 c3 ff ff ff ff ff ff ff ff
ff ff 00 ff a0 a0 a0 a0 a0 a0 a0 a0 a0 8c 01 06
SR[00-27]
03 01 0f 00 0e 05 06 07 06 5e 40 00 0c 50 00 00
43 72 84 6b 00 83 42 08 00 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 8c 40 21 00 00 7f 4b 4b a8 91 93 51 06 13 40
00 48 48 00 00 00 01 97 91 0d 00 ff ff ff c0 c0
00 10 00 08 00 10 00 00 13 c0 00 00 00 00 40 40
08 08 08 08 08 10 99 54 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
(II) S3VIRGE(0): Using CFB
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
S3VDGAInit
S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=2, mdbitsPP=16
S3VHWCursorInit
(**) Option "dpms"
(**) S3VIRGE(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse0: Buttons: 3
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
S3VModeInit
S3VModeInit dclk=65000
S3VInitSTREAMS
S3VWriteMode
S3VGEReset sub_stat=b000
restarting S3 graphics engine reset 1 ...
S3VGEReset sub_stat=b000
S3VGEReset sub_stat=b000
restarting S3 graphics engine reset 1 ...
S3VGEReset sub_stat=b000
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
ef
CR[00-2f]
a3 7f 7f 86 83 94 24 f5 00 60 00 00 00 00 00 00
03 29 ff 00 00 ff 24 c3 ff ff ff ff ff ff ff ff
ff ff 00 ff a0 a0 a0 a0 a0 a0 a0 a0 a0 8c 01 06
SR[00-27]
03 01 0f 00 0e 05 06 07 06 5e 40 00 0c 50 00 00
43 72 84 6b 00 83 42 08 00 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 8c 40 a0 00 00 7f 4b 4b a8 91 93 51 06 13 40
00 48 48 00 00 00 01 22 20 8f 00 ff ff ff c0 c0
00 10 00 08 00 10 00 00 13 c0 00 00 00 00 40 40
08 08 08 08 08 10 99 54 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
S3VModeInit
S3VModeInit dclk=65000
S3VInitSTREAMS
S3VWriteMode
S3VGEReset sub_stat=b000
restarting S3 graphics engine reset 1 ...
S3VGEReset sub_stat=b000
S3VGEReset sub_stat=b000
restarting S3 graphics engine reset 1 ...
S3VGEReset sub_stat=b000
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
ef
CR[00-2f]
a3 7f 7f 86 83 94 24 f5 00 60 00 00 00 00 00 00
03 29 ff 00 00 ff 24 c3 ff ff ff ff ff ff ff ff
ff ff 00 ff a0 a0 a0 a0 a0 a0 a0 a0 a0 8c 01 06
SR[00-27]
03 01 0f 00 0e 05 06 07 06 5e 40 00 0c 50 00 00
43 72 84 6b 00 83 42 08 00 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 8c 40 a1 00 00 7f 4b 4b a8 91 93 51 06 14 40
00 48 48 00 00 00 01 22 20 8f 00 ff ff ff c0 c0
00 10 00 08 00 10 00 00 13 c0 00 00 00 00 40 40
08 08 08 08 08 10 99 54 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
S3VWriteMode
S3VGEReset sub_stat=b000
restarting S3 graphics engine reset 1 ...
S3VGEReset sub_stat=b000
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
67
CR[00-2f]
5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 3f ff
9c 0e 8f 28 1f 96 b9 a3 ff ff ff ff ff ff ff ff
ff ff 00 ff a0 a0 a0 a0 a0 a0 a0 a0 a0 8c 01 06
SR[00-27]
03 00 03 00 02 05 06 07 06 5e 40 00 0c 50 00 00
43 72 84 6b 00 02 42 08 20 20 40 9f fc 3e 9c 33
ff 88 c2 36 c2 3d 40 e6
Gr Cont GR[00-0f]
00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f
CR[30-6f]
e1 05 40 81 00 00 7f 4b 4b a8 81 00 10 06 5d 40
00 03 03 00 00 00 01 1f 18 90 00 ff ff ff c0 c0
00 00 00 08 00 00 00 00 43 c0 00 00 00 00 00 00
08 08 08 00 00 00 80 00 bf a0 80 02 00 ff 00 ff
(II) S3VIRGE(0): END register dump --------------------
S3VDisableMmio
