Could be your fonts, you can
try again by removing all font paths from your /etc/X11/XF86Config (resp
/etc/X11/XF86Config-4 for
some distros) and (if it is not already there) add in the module section
Load "freetype" # TrueType font handler
Load "type1" # Adobe Type 1 font handler
Load "speedo"
If it does not work, post your XF86Config[-4]
Lionel
--- ali abakan <[EMAIL PROTECTED]> wrote:
>
> I m using XFree86 403 and I cant see any thing on my screen and my screen goes to
>waiting
> display
>
> I have S3 Savage3D chipset and I cant see X window system please help the X window
>system out
> put is here:
>
> <<<<<<<<<<<<<<<<<<<<Starts>>>>>>>>>>>>>>>>>>>>>
>
>
>
> XFree86 Version 4.0.3 / X Window System
>
> (protocol Version 11, revision 0, vendor release 6400)
>
> Release Date: 16 March 2001
>
> If the server is older than 6-12 months, or if your card is
>
> newer than the above date, look for a newer version before
>
> reporting problems. (See http://www.XFree86.Org/FAQ)
>
> Operating System: Linux 2.2.17-8smp i686 [ELF]
>
> Module Loader present
>
> (==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 17 17:01:08 2002
>
> (==) Using config file: "/etc/X11/XF86Config-4"
>
> Markers: (--) probed, (**) from config file, (==) default setting,
>
> (++) from command line, (!!) notice, (II) informational,
>
> (WW) warning, (EE) error, (??) unknown.
>
> (==) ServerLayout "XFree86 Configured"
>
> (**) |-->Screen "Screen0" (0)
>
> (**) | |-->Monitor "VES3715"
>
> (**) | |-->Device "S3 Savage3D"
>
> (**) |-->Input Device "Mouse0"
>
> (**) |-->Input Device "Keyboard0"
>
> (**) XKB: layout: "us"
>
> (**) FontPath set to "unix/:7100"
>
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
>
> (==) ModulePath set to "/usr/X11R6/lib/modules"
>
> (--) using VT number 7
>
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
>
> (II) Module bitmap: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
>
> (II) Module pcidata: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 0.1.0
>
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
>
> (II) Module scanpci: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 0.1.0
>
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
>
> (--) PCI: (0:18:0) BrookTree unknown chipset (0x036e) rev 17, Mem @ 0xec000000/12
>
> (--) PCI:*(1:0:0) S3 Savage3D (86E391) rev 1, Mem @ 0xd8000000/27
>
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
>
> (II) Module dbe: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
>
> (II) Module GLcore: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
>
> (II) Module dri: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
>
> (II) Module drm: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
>
> (II) Module glx: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
>
> (II) Module extmod: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
>
> (II) Module v4l: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 0.0.1
>
> (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
>
> (II) Module savage: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.1.15
>
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
>
> (II) Module mouse: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) v4l driver for Video4Linux
>
> (II) SAVAGE: driver (version 1.1.15) for S3 Savage chipsets: Savage4,
>
> Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
>
> Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
>
> TwisterK
>
> (--) Assigning device section with no busID to primary device
>
> (--) Chipset Savage3D found
>
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
>
> (II) Module vgahw: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 0.1.0
>
> (**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
>
> (==) SAVAGE(0): RGB weight 565
>
> (==) SAVAGE(0): Default visual is TrueColor
>
> (==) SAVAGE(0): Using HW cursor
>
> (==) SAVAGE(0): Using video BIOS to set modes
>
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
>
> (II) Module int10: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
>
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
>
> (II) Module vbe: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) SAVAGE(0): VESA BIOS detected
>
> (--) SAVAGE(0): Chip: id 8a20, "Savage3D"
>
> (--) SAVAGE(0): Engine: "Savage3D"
>
> (--) SAVAGE(0): mapping MMIO @ 0xd9000000 with size 0x80000
>
> (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
>
> (--) SAVAGE(0): probed videoram: 8192k
>
> (II) Loading /usr/X11R6/lib/modules/libddc.a
>
> (II) Module ddc: vendor="The XFree86 Project"
>
> compiled for 4.0.3, module version = 1.0.0
>
> (II) SAVAGE(0): VESA VBE DDC supported
>
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
