One again, thank you for your reply. Unfortunately, the agpgart module was in infact
loaded before X was started. Since this is not my problem does any one else have any
idea why AGP is failing to initialize?
Here's the relevent clip from the XFree86.0.log:
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) R128(0): [drm] created "r128" driver at busid "PCI:1:0:0"
(II) R128(0): [drm] added 8192 byte SAREA at 0xd88a5000
(II) R128(0): [drm] mapped SAREA 0xd88a5000 to 0x40018000
(II) R128(0): [drm] framebuffer handle = 0xd4000000
(II) R128(0): [drm] added 1 reserved context for kernel
(WW) R128(0): [agp] AGP not available
(WW) R128(0): [agp] AGP failed to initialize -- falling back to PCI mode.
(WW) R128(0): [agp] Make sure you have the agpgart kernel module loaded.
(II) R128(0): [pci] 8192 kB allocated with handle 0xd98bf000
(II) R128(0): [pci] ring handle = 0xd98bf000
(II) R128(0): [pci] Ring mapped at 0x4122e000
(II) R128(0): [pci] Ring contents 0x00000000
(II) R128(0): [pci] ring read ptr handle = 0xd99c0000
(II) R128(0): [pci] Ring read ptr mapped at 0x4001a000
(II) R128(0): [pci] Ring read ptr contents 0x00000000
(II) R128(0): [pci] vertex/indirect buffers handle = 0xd99c1000
(II) R128(0): [pci] Vertex/indirect buffers mapped at 0x4132f000
(II) R128(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) R128(0): [drm] register handle = 0xd9000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1024,3840)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 3070
(II) R128(0): Reserved back buffer from (0,770) to (1024,1538)
(II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307)
(II) R128(0): Reserved depth span from (0,2306) offset 0x481000
(II) R128(0): Reserved 8704 kb for textures at offset 0x780000
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 4614)
(II) R128(0): Largest offscreen area available: 1024 x 1531
(**) Option "dpms"
(**) R128(0): DPMS enabled
(II) R128(0): X context handle = 0x00000001
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): Direct rendering enabled
In a message dated Fri, 26 Apr 2002 12:48:21 PM Eastern Daylight Time, Michel D�nzer
<[EMAIL PROTECTED]> writes:
>On Fri, 2002-04-26 at 17:58, [EMAIL PROTECTED] wrote:
>> In a message dated Fri, 26 Apr 2002 8:46:29 AM Eastern Daylight Time, Michel
>D�nzer <[EMAIL PROTECTED]> writes:
>>
>> >On Wed, 2002-04-24 at 08:09, [EMAIL PROTECTED] wrote:
>> >>
>> >> I'm having a problem with AGP initialaizing. I did modprobe -r
>> >> agpgart, depmod -a, and modprobe agpgart to reload the module. That didn't fix
>the problem.
>> >
>> >The agpgart module needs to be loaded before the r128 kernel module or
>> >the latter can't use it.
>> >
>> >It's a good idea to build agpgart into the kernel in general as loading
>> >the module can fail due to memory fragmentation.
>>
>> Thank you Michel. If the module failed to load wouldn't that be reported by
>modprobe -v ?
>>
>> [root@tire /root]# modprobe -rv agpgart
>> # delete agpgart
>> [root@tire /root]# depmod -a
>> [root@tire /root]# modprobe -v agpgart
>> /sbin/insmod /lib/modules/2.4.9-31/kernel/drivers/char/agp/agpgart.o
>> Using /lib/modules/2.4.9-31/kernel/drivers/char/agp/agpgart.o
>> Symbol version prefix ''
>> [root@tire /root]#
>>
>> I don't see where there is any problem reported with the module load.
>> That might be because I don't know what to look for. Do you see a
>> problem with what is reported here?
>
>That was just a general hint, I didn't imply it was your problem.
>
>Your problem probably was that agpgart wasn't loaded when r128 got
>loaded.
>
>
>--
>Earthling Michel D�nzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
>XFree86 and DRI project member / CS student, Free Software enthusiast
>_______________________________________________
>Xpert mailing list
>[EMAIL PROTECTED]
>http://XFree86.Org/mailman/listinfo/xpert
>
--
Mark LaPierre
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
