hi xf folks,
typical newbie question, i have downloade, built, and now
installed xf 4.2.0. as it built so clean, i figured i'd
go for broke and install it.
alas, i get a problem, no gui after a reboot. looking at the
startup logs, i see unresolved externals,
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 1540)
(II) R128(0): Largest offscreen area available: 1024 x 7419
(**) Option "dpms"
(**) R128(0): DPMS enabled
(WW) R128(0): Option "CalcAlgorithm" is not used
(II) R128(0): Direct rendering disabled
Symbol drmFreeBufs from module /usr/X11R6/lib/modules/drivers/r128_drv.o
is unre
solved!
Symbol drmR128TextureBlit from module
/usr/X11R6/lib/modules/drivers/r128_drv.o
is unresolved!
Symbol drmFreeBufs from module /usr/X11R6/lib/modules/drivers/r128_drv.o
is unre
solved!
pci finds...
(--) PCI:*(1:0:0) ATI Rage 128 Pro PF rev 0, Mem @ 0xd4000000/26,
0xd9000000/14,
I/O @ 0xc000/8
as the rage pro driver.o was timestamped at the same time as my update,
clearly it was overwritten.
so, to avoid making a bad thing worse, can anyone provide me a pointer
on where to go from here?
thanks in advance, jackc...
--
-------------------------------------------------------------------------------
Jack Craig ImageIntegration 831-684-1375
[EMAIL PROTECTED]
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
