Thanks Alan but
Ooops! I replace driver with the new one, but you can see the result on log file. Linux hang up on "XP: BitBlt engine time-out" May be I must compile the DRM Kernel module ? Tino ----- Original Message ----- From: "Alan Hourihane" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, May 23, 2002 5:23 PM Subject: Re: [Newbie]Trident CyberBladeXP 32M > Download a new driver from http://www.xfree86.org/~alanh to fix these > problems. > > Alan. > > On Thu, May 23, 2002 at 03:53:00 +0100, Tino Pintonato wrote: > > Thanks SAM > > > > I got the X running with your config file. > > > > I have some other questions: > > 1) On the log X find a TFT display ?? I have a Hansol 710 P (Max res 1600 x > > 1200 @ 75 Hz) > > X works with max 800x600, if I try 1280 x 1024 I got double image > > overlapped, res seems 640x480 > > 2) On the log X find a 8MB ram, but it is 32MB. Why? > > 3) Option "Display1400" is not used, it means something? > > > > Thanks, > > > > Tino Pintonato > > > > ----- Original Message ----- > > From: <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, May 15, 2002 4:08 PM > > Subject: Re: [Newbie]Trident CyberBladeXP 32M > > > > > > > > > > I have a Trident XP and am running RedHat 7.3 with Xfree 4.2. Here is a > > copy of my XF86config-4 file > > > > (See attached file: XF86Config-4) > > > > Works fine for 1400 x 1050 and below, although there is a slight bug with a > > small poirtion of the left side of the screen being moved to the right. > > > > Cheers, > > > > -------------------------------------------------------------------------- -- > > ----------------- > > > > Sam Rudland > > > > > > > > |---------+----------------------------> > > | | "Tino Pintonato" | > > | | <riko.tecnici@ria| > > | | lto.sk> | > > | | Sent by: | > > | | newbie-admin@XFre| > > | | e86.Org | > > | | | > > | | | > > | | 05/15/02 04:44 PM| > > | | Please respond to| > > | | newbie | > > | | | > > |---------+----------------------------> > > > > >--------------------------------------------------------------------------- > > -------------------------------------------------------------| > > | > > | > > | To: <[EMAIL PROTECTED]> > > | > > | cc: > > | > > | Subject: [Newbie]Trident CyberBladeXP 32M > > | > > > > >--------------------------------------------------------------------------- > > -------------------------------------------------------------| > > > > > > > > > > > > Hi > > > > I have mainboard INTEL with integrated a Trident CyberBladeXP/T64/T16 32M. > > > > I first install RedHat 7.2 (X4.1), installation proceed ok, but X show > > only black display. > > After some search I found that X 4.2 support the CyberBladeXP. > > > > I try Mandrake 8.3 (X 4.2), on X check the maximum resulution seems to be > > < 640 x 480. > > On running system X start but still resolution remain low, X seems start, > > login screen is over > > the dimensions of the display and it doesn't work. > > > > I try to configure with XFree86 -configure. The same. > > I try xf86config. The same. > > I try xf86cfg. The same. > > > > I include configuration and log file. > > > > Someone could help me? > > > > Thanks > > Tino > > (See attached file: XFree86.0.log) > > (See attached file: XF86Config) > > > > > > > > > > _______________________________________________ > Newbie mailing list > [EMAIL PROTECTED] > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie
XFree86.0.log
Description: Binary data
