RE: [Newbie]can superprobe detect video ram?

[Cary Pembleton]

Jason, You probably do not need to worry about clock chip settings. This was for the older video chips which is not often used anymore. To see what version of Xfree86 you are running just type Xfree86 –version. This will tell you the running version. To find out what your hardware is you can use Superprobe. Just type Superprobe at the command prompt and hopefully it will find it. If it does not, then you will have to open up the PC and look at the chip on the video card. This should give you a good idea of who made the video card. Then go to their website and look for a program that can diagnose their chipset. A lot of video cards will have a small firmware bitmap that displays just before your boot up or POST screen comes up that should tell you a lot about the video card.   PC Networks, Inc. and KY4U, LLC Cary Pembleton 32 Cove LN Campbellsville, KY 42718 270-469-4405 Office 270-469-9104 Fax 270-403-6666 Corporate Cell (Corporate Business Only) mailto:[EMAIL PROTECTED] E-Mail Address http://www.ky4u.com/ Corporate Site http://www.clickonamovie.com/ Project Site   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jason Forehand Sent: Tuesday, June 11, 2002 12:43 PM To: [EMAIL PROTECTED] Subject: [Newbie]can superprobe detect video ram?   I get most of my equipment second hand, and have limited access to documentation.  Is there a way I can get detect video ram and clockchip settings? I am running redhat 7.0- also, How do I find which version of XF86 Im running through gnome?