Arrrg! I feel I'm very close..... but still no cigar.
The log basically tells me that it couldn't detect any devices. I've tried
configuring manually, but no dice. A file that is referenced
/usr/X11R6/lib/doc/README.cirrus, is conveniently missing.
In any case, the full log is attached, followed by my XFConfig file.
<START LOG>
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Sep 17 12:35:19 2002
(==) Using config file: "/etc/X11/XF86Config"
(WW) No Layout section. Using the first Screen section.
(**) |-->Screen "svga" (0)
(**) | |-->Monitor "Compaq P75 Color Monitor"
(**) | |-->Device "POS"
(==) |-->Input Device "Implicit Core Pointer"
(==) |-->Input Device "Implicit Core Keyboard"
(**) Option "Protocol" "Standard"
(**) Option "AutoRepeat" "500 5"
(**) Option "XkbDisable"
(**) XKB: disabled
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 114f,0012 card 0000,0000 rev 01 class 07,80,00 hdr
00
(II) PCI: 00:0d:0: chip 8086,1229 card 103c,10c0 rev 02 class 02,00,00 hdr
00
(II) PCI: 00:0e:0: chip 8086,0482 card 0000,0000 rev 15 class 00,00,00 hdr
00
(II) PCI: 00:0f:0: chip 8086,0008 card 0008,8000 rev 00 class ff,00,00 hdr
00
(II) PCI: 00:14:0: chip 8086,84c5 card 0000,0000 rev 05 class 05,00,00 hdr
00
(II) PCI: 00:19:0: chip 8086,84c4 card 0000,0000 rev 06 class 06,00,00 hdr
00
(II) PCI: 00:1a:0: chip 8086,84c4 card 0000,0000 rev 06 class 06,00,00 hdr
00
(II) PCI: 01:0a:0: chip 8086,1229 card 103c,10c0 rev 02 class 02,00,00 hdr
00
(II) PCI: 01:0b:0: chip 9004,8078 card 0000,0000 rev 00 class 01,00,00 hdr
00
(II) PCI: 01:0c:0: chip 9004,8078 card 0000,0000 rev 00 class 01,00,00 hdr
00
(II) PCI: 01:0e:0: chip 8086,0960 card 0000,0000 rev 03 class 06,04,00 hdr
81
(II) PCI: 01:0e:1: chip 8086,1960 card 103c,10c6 rev 03 class 0e,00,01 hdr
80
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:25:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:26:0), (-1,1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2: bridge is at (1:14:0), (1,2,2), BCTRL: 0x03 (VGA_EN is cleared)
(II) Bus 2 I/O range:
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xfd200000 - 0xfd2fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0xfc200000 - 0xfc2fffff (0x100000) MX[B]
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xfcc00000 - 0xfcffffff (0x400000) MX[B]
[1] -1 0xfd9fe000 - 0xfd9fefff (0x1000) MX[B]
[2] -1 0xfd9ff000 - 0xfd9fffff (0x1000) MX[B]
[3] -1 0xfd800000 - 0xfd8fffff (0x100000) MX[B]
[4] -1 0xfd1ff000 - 0xfd1fffff (0x1000) MX[B]
[5] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[6] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[7] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[8] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[9] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[10] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[11] -1 0xfe900000 - 0xfe9fffff (0x100000) MX[B]
[12] -1 0xfdaff000 - 0xfdafffff (0x1000) MX[B]
[13] -1 0xfe400000 - 0xfe7fffff (0x400000) MX[B]
[14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[16] -1 0x0000e8e0 - 0x0000e8ff (0x20) IX[B]
[17] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xfcc00000 - 0xfcffffff (0x400000) MX[B]
[1] -1 0xfd9fe000 - 0xfd9fefff (0x1000) MX[B]
[2] -1 0xfd9ff000 - 0xfd9fffff (0x1000) MX[B]
[3] -1 0xfd800000 - 0xfd8fffff (0x100000) MX[B]
[4] -1 0xfd1ff000 - 0xfd1fffff (0x1000) MX[B]
[5] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[6] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[7] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[8] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[9] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[10] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[11] -1 0xfe900000 - 0xfe9fffff (0x100000) MX[B]
[12] -1 0xfdaff000 - 0xfdafffff (0x1000) MX[B]
[13] -1 0xfe400000 - 0xfe7fffff (0x400000) MX[B]
[14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[16] -1 0x0000e8e0 - 0x0000e8ff (0x20) IX[B]
[17] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfcc00000 - 0xfcffffff (0x400000) MX[B]
[6] -1 0xfd9fe000 - 0xfd9fefff (0x1000) MX[B]
[7] -1 0xfd9ff000 - 0xfd9fffff (0x1000) MX[B]
[8] -1 0xfd800000 - 0xfd8fffff (0x100000) MX[B]
[9] -1 0xfd1ff000 - 0xfd1fffff (0x1000) MX[B]
[10] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[11] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[12] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[13] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[13] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[14] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[15] -1 0x80000000 - 0x800003ff (0x400) MX[B]
[16] -1 0xfe900000 - 0xfe9fffff (0x100000) MX[B]
[17] -1 0xfdaff000 - 0xfdafffff (0x1000) MX[B]
[18] -1 0xfe400000 - 0xfe7fffff (0x400000) MX[B]
[19] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[22] -1 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[23] -1 0x0000e8e0 - 0x0000e8ff (0x20) IX[B]
[24] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) Primary Device is: PCI 00:0e:0
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
<END LOG>
<START XFConfig>
# File generated by XConfigurator.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "ServerFlags"
#NoTrapSignals
#DontZap
#DontZoom
EndSection
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds 1 2 3
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
# LeftAlt Meta
# RightAlt Meta
# ScrollLock Compose
# RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Emulate3Buttons
Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Compaq P75 Color Monitor"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30.0-85.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50.0-150.0
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388
404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388
404 -HSync -VSync
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync
+VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494
530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484
500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484
509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610
640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync
+vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync
+vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621
657 -HSync -VSync
# 1024x480 for certain Vaios
Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781
802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777
806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777
806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788
822 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885
902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876
892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x960 @ 60 HzModeline "1280x960" 108 1280 1376 1488 1800 960 961
964 1000 +HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960" 148.5 1280 1344 1504 1728 960 961
964 1011 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046
1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040
1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync
+VSync
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync
+VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync
+VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync
+VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync
+VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync
+VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204
1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync
+VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync
+VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync
+VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync
+VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312
Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314
Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333
Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Device configured by Xconfigurator:
Section "Device"
Identifier "POS"
VendorName "Cirrus"
BoardName "GD5424"
VideoRam 512
Driver "cirrus"
# Device section for Cirrus Logic GD5420/2/4/6/8/9-based cards.
MemBase 0x00e00000
MemBase 0x04e00000
Option "linear"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
# Use Device "Generic VGA" for Standard VGA 320x200x256
Device "Generic VGA"
Device "POS"
Monitor "Compaq P75 Color Monitor"
DefaultColorDepth 8
Subsection "Display"
Depth 8
# Omit the Modes line for the "Generic VGA" device
#Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "POS"
Monitor "Compaq P75 Color Monitor"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "POS"
Monitor "Compaq P75 Color Monitor"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
<END XFConfig>
David E. Fitzgerald, Jr.
Edge Planning
Genuity Solutions, Inc.
Phone: (781) 865-6487
E-mail: [EMAIL PROTECTED]
Pager: [EMAIL PROTECTED]
AIM: FitzAtGenuity
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Lionel Lecoq
Sent: Tuesday, September 17, 2002 3:50 PM
To: [EMAIL PROTECTED]
Subject: Re: [Newbie]Configuring X
I would be very surprised if the "dumb" vga with 8 bit depth would not
work...
at worst edit the XF86Config. I would also be modest and settle with X 3.3.6
(which Xconfigurator
should have selected anyway) I would also possibly not let Xconfigurator
perform the test of the
graphic configuration, I had it die systematically there with the result
that the XF86Config was
not complete. Not performing the test and hacking XF86Config did the trick.
Lionel
--- "David E. Fitzgerald" <[EMAIL PROTECTED]> wrote:
> My Xconfigurator under RedHat 7.3 will not successfully configure itself.
I
> suspect it has something to do with the video card, even though the card
is
> supported.
>
> The card is an old Cirrus CLGD5424 with 512 KB RAM. It is capable of VCGA
> and SVGA, and is really all I need for this server.
>
> I've tried all of the various options from within Xconfigurator, but no
> dice. Any assistance would be greatly appreciated.
>
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________
Do you Yahoo!?
Yahoo! News - Today's headlines
http://news.yahoo.com
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
