Hi,
I have just installed X on my already existing "command line only" RH7.3
machine. I installed every XFree86 rpm I could find, all the dependencies
and the fvwm2 rpms.
I am having trouble with starting X. It keeps saying that it doesn't
recognize the "Section names", but these are the section names created by
xf86config. After looking around on the net I found a few people with
similar probs but no solution.
I've included as much info below as I could think of. Any help would be
appreciated.
Regards,
Reagen.
#############################################################
Installed RPM's :
[root@solitare X11]# rpm -q --all | grep X
XFree86-libs-4.1.0-3
XFree86-75dpi-fonts-4.1.0-3
XFree86-ISO8859-15-75dpi-fonts-4.1.0-3
XFree86-ISO8859-2-100dpi-fonts-4.1.0-3
XFree86-ISO8859-9-100dpi-fonts-4.1.0-3
XFree86-compat-libs-4.0.3-2
XFree86-3DLabs-3.3.6-42
XFree86-AGX-3.3.6-42
XFree86-Mach32-3.3.6-42
XFree86-Mach8-3.3.6-42
XFree86-S3-3.3.6-42
XFree86-SVGA-3.3.6-42
XFree86-W32-3.3.6-42
XFree86-devel-4.1.0-3
Xaw3d-1.5-10
XFree86-twm-4.1.0-3
XFree86-ISO8859-7-100dpi-fonts-1.0-10
XFree86-ISO8859-7-Type1-fonts-1.0-10
XFree86-KOI8-R-100dpi-fonts-1.0-6
XFree86-Xnest-4.1.0-3
Xconfigurator-4.9.39-1
XFree86-xdm-4.1.0-3
XFree86-XF86Setup-3.3.6-29
XFree86-xfs-4.1.0-3
XFree86-100dpi-fonts-4.1.0-3
XFree86-ISO8859-15-100dpi-fonts-4.1.0-3
XFree86-jpfonts-2.1-24
XFree86-ISO8859-2-75dpi-fonts-4.1.0-3
XFree86-ISO8859-9-75dpi-fonts-4.1.0-3
XFree86-compat-modules-3.3.6-42
XFree86-8514-3.3.6-42
XFree86-FBDev-3.3.6-42
XFree86-Mach64-3.3.6-42
XFree86-Mono-3.3.6-42
XFree86-P9000-3.3.6-42
XFree86-S3V-3.3.6-42
XFree86-VGA16-3.3.6-42
XFree86-cyrillic-fonts-4.1.0-3
XFree86-doc-4.1.0-3
XFree86-4.1.0-3
XFree86-tools-4.1.0-3
XFree86-ISO8859-7-1.0-10
XFree86-ISO8859-7-75dpi-fonts-1.0-10
XFree86-KOI8-R-1.0-6
XFree86-KOI8-R-75dpi-fonts-1.0-6
XFree86-Xvfb-4.1.0-3
XFree86-xf86cfg-4.1.0-3
############################################################
Contents of /etc/X11/XF86Config
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
ModelName "DELL D825TM"
HorizSync 30.0 - 64.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "rgbbits" # <i>
#Option "NoAccel" # [<bool>]
#Option "TurboQueue" # [<bool>]
#Option "SetMClk" # <freq>
#Option "FastVram" # [<bool>]
#Option "ForceCRT2Type" # [<str>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "NoXvideo" # [<bool>]
Identifier "Card0"
Driver "sis"
VendorName "SiS"
BoardName "630"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
##########################################################################
startx Output:
[root@solitare X11]# startx
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: April 19, 2001
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520,
ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548,
ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300,
mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, i815, smi, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
Config Error: /usr/X11R6/lib/X11/XF86Config:1
Section "ServerLayout"
^^^^^^^^^^^^^^
not a recognized section name
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
