Question: Does your motherboard have a brown AGP slot.
Another question: Is the ATI Rage 2C a PCI card? (sorry I am unfamiliar with this card). The i810 operates as an agp card even though it is embedded on the motherboard. The PCI card won't and that may explain some of the problem your having as the AGPGART module would be expecting an AGP card not the PCI. I admit that this may not help, but it may give more knowledgable people on the list a better idea of what's going on. Thanks Steve On Tue, 2002-10-08 at 18:17, P. Jourdan wrote: > I had no idea I had a built-in video card (i-810) on the motherboard until > I tried to set up XFree86-4.2. I had installed the ATI Rage 2c and was > using it fine on Win2k. > On FreeBSD 4.6.2, I get the error message (WW) VGA: No matching Device > section for instance (BusID PCI:1:4:0) found > > The /stan/sysinstall graphic configuration of XFree86 simply does not work > when both cards are installed. > > I tried using only the i810 built-in card but that works only with 480 > resolution which simply is not adequate for squat. > The agp.ko is correctly loaded and there is the correct agpgart in /dev. > However, I can find nothing on or about agpgart.o that seems to be required > to be able to use all the screen options. > I have also found that my present setup (with the two cards) is apparently > "dual head" which is also not supported (?). I don't even want it... :)) > > Does anyone understand what has to be done to make XFree86 work, > preferrably with the ATI card? But even the i810 will do? > thanks for any help. > Philip Jourdan > > > _______________________________________________ > Newbie mailing list > [EMAIL PROTECTED] > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
