Hi Vojtec,
> Hello,
>
> thanks a lot for a new snapshot, new appereance of web interface is a
> big plus!
Thanks! - nice to hear.
>
> When we updated to this last snapshot, we got some problems and can't
> find solutions, if anybody has some idea, you are welcomed:
>
> 1. Some sources are not collected. When I start NfSen, collecting of
> five sources is not started. I'm starting NfSen after reboot of machine,
> so no other collectors are running there, also no nfsend or nfcapd
> running. In /var/log/syslog I can find these messages:
>
> Jan 23 13:56:25 localhost /usr/local/bin/nfcapd[2645]: Startup.
> Jan 23 13:56:25 localhost /usr/local/bin/nfcapd[2646]: Bound to IPv4
> host/IP: any, Port: 60004
> Jan 23 13:56:25 localhost /usr/local/bin/nfcapd[2646]: Standard
> setsockopt, SO_RCVBUF is 109568 Requested length is 200000 bytes
> Jan 23 13:56:25 localhost /usr/local/bin/nfcapd[2646]: System set
> setsockopt, SO_RCVBUF to 262142 bytes
> Jan 23 13:56:25 localhost /usr/local/bin/nfcapd[2648]: Another collector
> with pid 2642 is already running, and configured for
> '/mnt/data/nfsen/profiles/live/kovesau9'
> Jan 23 13:56:25 localhost /usr/local/bin/nfcapd[2648]: initialize
> bookkeeper failed.
>
> The only way, how I can start collectors for these sources, is to stop
> NfSen, then mannually start nfcapd for these problematic sources and
> then start NfSen.
Which is the old version you upgraded? The bookkeeper is not new to the
snapshot. If you look at the log nfdump complains and teklls you which
Process pid is running to collect data for this data directory. And this
other process does actually run, as nfdump will check this. Could you
please check which proces it is? How does your nfsen.conf look like?
>
> 2. Other problematic issue is about one specific profile with two
> sources. This profile has inside historical data for last two month,
> type of this profile is Continuous and Status is OK, but the end of
> profile is yesterday, before the upgrade of NfSen and now this profile
> is not updated. The source, which is in this profile, is correctly
> collected, as I can see in the profile Live, where is this source still
> updating.
So what does the logfile say? If a profile can not be updated, the reason
is reported into the log file.
>
> 3. Small detail - in the Detail page, bellow the table with statistical
> data, the butten None doesn't work - it displays a message
Yes - this is a known bug and will be fixed later.
- Peter
>
>
> ERROR: No value for 'channellist'!
>
> Thanks for any ideas.
> Vojtec
>
> PS: There were no problems during upgrade of NfSen to the last snapshot.
> Also we use last snapshot of Nfdump.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Nfsen-discuss mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
>
--
_______ SWITCH - The Swiss Education and Research Network ______
Peter Haag, Security Engineer, Member of SWITCH CERT
PGP fingerprint: D9 31 D5 83 03 95 68 BA FB 84 CA 94 AB FC 5D D7
SWITCH, Limmatquai 138, CH-8001 Zurich, Switzerland
E-mail: [EMAIL PROTECTED] Web: http://www.switch.ch/
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Nfsen-discuss mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
