Hi,
I have been running nfsen for a month or so and had good luck setting up
sources but I’m having a strange problem now. I’m sending data from an MX104
to a flow collector. I used the standard config from the Juniper KB article
and not receiving flow data. When I run tcpdump this is what I get.
[root@flow01d ~]# tcpdump udp port 9901
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on bond0, link-type EN10MB (Ethernet), capture size 65535 bytes
^C
0 packets captured
24 packets received by filter
0 packets dropped by kernel
I do not see the packets being output, I see something about packets being
caught by filter and none dropped. Any idea how I troubleshoot this further?
I don’t understand how I’m receiving packets but they don’t display and if I
issue the same command on a working port I get tons of output. Any pointers
would be most appreciated.
Thanks
Scott
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Nfsen-discuss mailing list
Nfsen-discuss@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
