I had the same problem.
I solved it by tunning some flags on the fprobe side.
At least for me nfsen side is working properly for a ยท3gbps traffic , so
my advice would to focus on the juniper side.
The graphic shape is ok ? (max and min values?) can you compare with a
cacti graph?
Leandro
On 17/12/15 17:14, Levi Pederson wrote:
All,
We're running a packet flow server using NFSEN and it works perfectly
with a pair of MX104 Juniper Routers.
We applied the exact same configuration on both are seeing an odd issue.
1. Full Mbps is not being shown
1. Cacti Shows 2.2 Gigs we're seeing 1Gig on the nfsen
2. Packet flow is not complete
1. We're plateauing at 50k packets per second on the Nfsen...Real
flow is upward of 200k PPS
Same issue seen on a third party flow analyzer.
Has anyone come across this issue?
Thank you,
*Levi Pederson*
Mankato Networks LLC
cell | 612.481.0769
work | 612.787.7392
levipeder...@mankatonetworks.net <mailto:levipeder...@mankatonetworks.net>
------------------------------------------------------------------------------
_______________________________________________
Nfsen-discuss mailing list
Nfsen-discuss@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
------------------------------------------------------------------------------
_______________________________________________
Nfsen-discuss mailing list
Nfsen-discuss@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
