you can also adjust your entity mappings like this <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="ExpressBook" namespace="ExpressBook.Services.BaseDataObjects"> <class name="StudentBase"> ... because you define the assembly and namespace in the root element you can then use the short name when defining your mappings. If you define the assembly in hibernate.config.xml, then you do not need to add the assembly like Harold demonstrated above. If you are not defining the assembly in the config file then the you need to add the assembly when you instantiate Nh configuration.
I'm not familiar with Windows 7 or IIS 7 but I have read about the medium trust issue. there is an NH add on to create static proxies (rather than dynamic proxies) which is where the medium trust issue occurs. I think there is a link on NHForge to this. Since you are new to .net, C#, NH, and MVC I would recommend spiking examples independent of each other. Once you feel comfortable with the frameworks try integrating them together. for example: spike a vanilla MVC project and play around with it until you feel you understand how it works. spike a console application to experiment with NH spike a console application to experiment with C# symantics then you can integrate NH into your MVC project. when you come across an error you will be able to rule out some causes because you have a better understanding of how each framework works. On Mar 5, 2:36 am, Harold Wanyama <[email protected]> wrote: > tqwhite like Diego said you need to set up your configuration(i havent seen > u mention setting it up anywhere). This is such that nhibernate can be able > to locate your mapping files(set as embedded resources) something of the > sort...... Configuration cfg = new Configuration(); > cfg.AddAssembly("assemblyName"). At least that IMO is the cause of all your > problems. > > On Fri, Mar 5, 2010 at 6:48 AM, tqwhite <[email protected]> wrote: > > You obviously have it too good in Argentina. You're going to have to > > settle for my gratitude. > > > Your patient explanation put me on the right track. I couldn't get the > > addAssembly version to work, but putting the mapping clause into the > > config file worked great. I plowed through a couple of type issues and > > Voila!, Security Exception. > > > [SecurityException: That assembly does not allow partially trusted > > callers.] > > NHibernate.ByteCode.LinFu.ProxyFactory..cctor() +0 > > > I immediately went to my various bin directories and changed all of > > the downloaded files so they are not blocked. No dice. > > > I surfed the web and read that this is a common problem for > > nHibernate, that it requires full trust. I looked into my IIS7 setup > > and it is set to "Full (internal)". I changed it to High but it made > > no difference. > > > I googled about and found a lot of discussion of this problem. I added > > > <trust level="Medium" originUrl="" /> > > > to the config. And this > > > using System.Security; > > [assembly: AllowPartiallyTrustedCallers] > > > to the class that configures nHibernate. No improvement so I removed > > them. > > > I don't know how to make my copy of Windows 7 operate as "Full Trust", > > or honestly, what that means. > > > Any thoughts? > > > thanks, > > tqii > > > On Mar 4, 5:20 pm, Diego Mijelshon <[email protected]> wrote: > > > My kids might probably go to the public university, which is free in > > > Argentina, but thanks anyway. > > > > At some point in your code, you are creating a > > NHibernate.Cfg.Configuration > > > instance, from which you use BuildSessionFactory() to get the > > sessionFactory > > > you're using there. > > > You need to tell the configuration where to get the mappings from. > > > Since you already have the hbm.file(s) embedded in your assembly, you can > > > either: > > > - use the <mapping assembly="Assembly name"/> in the hibernate.cfg.xml > > file > > > - call configuration.AddAssembly(assembly) with the appropriate assembly > > > instance or name. > > > > Diego > > > > On Thu, Mar 4, 2010 at 20:11, tqwhite <[email protected]> wrote: > > > > First, tell me where your kids are going to college so I can start > > > > scholarships for them. I can't tell you how much I appreciate this > > > > help. > > > > > Also, I should note, so you can interpret my dopiness properly, that > > > > I'm new to C#, .NET, strongly typed languages and WIndows. I've been a > > > > php guy for the last decade, however. > > > > > I don't know how I am building my configuration. I have a working .NET > > > > MVC project. I referenced in nHibernate (and Lin Fu when I got an > > > > error requesting it). I grabbed hibernate.cfg.xml from the download > > > > and changed the database string. Is that the configuration you mean? > > > > > I checked my project's properties to make sure that I have the right > > > > assembly name. Is this what you are talking about:<hibernate-mapping > > > > xmlns="urn:nhibernate-mapping-2.2" assembly="ExpressBook" > > > > namespace="ExpressBook">? > > > > > I suspect that I am missing the meaning of your questions. Please ask > > > > me more. > > > > > thanks, > > > > tqii > > > > > On Mar 4, 4:54 pm, Diego Mijelshon <[email protected]> wrote: > > > > > How are you building your configuration? > > > > > More specifically, how are you adding the assembly? > > > > > > Diego > > > > > > On Thu, Mar 4, 2010 at 19:06, tqwhite <[email protected]> wrote: > > > > > > I've spent the last two days trying to get my first bit of > > nHibernate > > > > > > to work. I am in "No Persister" hell. > > > > > > > Following is everything I have relative to this problem (what I've > > > > > > tried, environment, file names, xml, classes, error text). > > > > > > > Please, for the love of all that is holy, help me!! > > > > > > > tqii > > > > > > > What I've tried: > > > > > > > I've moved the file around everywhere that makes sense. It is > > > > > > presently in the same directory as the class. > > > > > > I took out the class definition. Nothing changes at all. > > > > > > I inserted stupid assembly and namespace definitions. Nothing > > changes > > > > > > at all. > > > > > > I recreated my starter project a few times. Doesn't matter. > > > > > > All of the alternatives to "embedded resource" that seemed > > relevant. > > > > > > It is presently embedded. > > > > > > I changed the code to refer to a new class with a different name > > but > > > > > > left the hbm unchanged. Same error, different name. > > > > > > > Environment: > > > > > > > Windows 7 > > > > > > ASP.NET MVC > > > > > > ASP.NET 3.5 sp1 > > > > > > Visual Studio 2008 > > > > > > > File names: > > > > > > > In the same directory > > > > > > studentBase.cs > > > > > > studentBase.hbm.xml > > > > > > > Also, hibernate.cfg.xml is in the top directory of the project. I > > used > > > > > > the sample with no changes except the connection string. I think > > this > > > > > > is being found properly because I can induce errors by changing it. > > > > > > > StudentBase.hbm.xml: > > > > > > > <?xml version="1.0" encoding="utf-8" ?> > > > > > > <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" > > > > > > assembly="ExpressBook" namespace="ExpressBook"> > > > > > > <class name="ExpressBook.Services.BaseDataObjects.StudentBase, > > > > > > ExpressBook"> > > > > > > <id name="id" column="id" type="int32" unsaved-value="0"> > > > > > > <generator class="native"> > > > > > > </generator> > > > > > > </id> > > > > > > <property name="first" column="first" type="text" > > not-null="false"/ > > > > > > > <property name="last" column="last" type="text" > > not-null="false"/> > > > > > > </class> > > > > > > > </hibernate-mapping> > > > > > > > StudentBase.cs: > > > > > > > using System; > > > > > > using System.Collections.Generic; > > > > > > using System.Linq; > > > > > > using System.Web; > > > > > > > namespace ExpressBook.Services.BaseDataObjects > > > > > > { > > > > > > public class StudentBase > > > > > > { > > > > > > public virtual int id { get; set; } > > > > > > public virtual string first { get; set; } > > > > > > public virtual string last { get; set; } > > > > > > } > > > > > > } > > > > > > > The Offending Code: > > > > > > > Line 20: NHibernate.ISession session = > > > > > > sessionFactory.OpenSession(); > > > > > > Line 21: > > > > > > Line 22: return > > > > > > session.Get<Services.BaseDataObjects.StudentBase>(id); > > > > > > > The Error Message: > > > > > > > Stack Trace: > > > > > > > [MappingException: No persister for: > > > > > > ExpressBook.Services.BaseDataObjects.StudentBase] > > > > > > NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String > > > > > > entityName) +103 > > > NHibernate.Event.Default.DefaultLoadEventListener.OnLoad(LoadEvent > > > > > > event, LoadType loadType) +112 > > > > > > NHibernate.Impl.SessionImpl.FireLoad(LoadEvent event, LoadType > > > > > > loadType) +159 > > > > > > NHibernate.Impl.SessionImpl.Get(String entityName, Object id) > > +186 > > > > > > NHibernate.Impl.SessionImpl.Get(Type entityClass, Object id) +137 > > > > > > NHibernate.Impl.SessionImpl.Get(Object id) +175 > > > > > > ExpressBook.Models.Student.getStudentById(Int32 id) in C:\Users > > > > > > \tqwhite\Documents\Visual Studio > > 2008\Projects\ExpressBook\ExpressBook > > > > > > \Models\Student.cs:22 > > > > > > ExpressBook.Controllers.DistrictController.getStudentById(Int32 > > id) > > > > > > in C:\Users\tqwhite\Documents\Visual Studio > > 2008\Projects\ExpressBook > > > > > > \ExpressBook\Controllers\DistrictController.cs:22 > > > > > > lambda_method(ExecutionScope , ControllerBase , Object[] ) +79 > > > > > > System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase > > > > > > controller, Object[] parameters) +17 > > > System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext > > > > > > controllerContext, IDictionary`2 parameters) +178 > > > System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext > > > > > > controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 > > > > > > parameters) +24 > > > System.Web.Mvc.<>c__DisplayClassd.<InvokeActionMethodWithFilters>b__a() > > > > > > +52 > > > System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilt > > > > er > > > > > > filter, ActionExecutingContext preContext, Func`1 continuation) > > +254 > > > System.Web.Mvc.<>c__DisplayClassf.<InvokeActionMethodWithFilters>b__c() > > > > > > +19 > > > System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodWithFilters(Contro > > > > llerContext > > > > > > controllerContext, IList`1 filters, ActionDescriptor > > actionDescriptor, > > > > > > IDictionary`2 parameters) +192 > > > System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext > > > > > > controllerContext, String actionName) +314 > > > > > > System.Web.Mvc.Controller.ExecuteCore() +105 > > > > > > System.Web.Mvc.ControllerBase.Execute(RequestContext > > > > > > requestContext) +39 > > > System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestCon > > > > text > > > > > > requestContext) +7 > > > > > > System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__4() +34 > > > > > > System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() > > > > > > +21 > > > System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResu > > > > lt > > > > > > _) +12 > > > > > > > System.Web.Mvc.Async.WrappedAsyncResult`1.End() +59 > > > > > > System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult > > > > > > asyncResult) +44 > > ... > > read more » -- You received this message because you are subscribed to the Google Groups "nhusers" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nhusers?hl=en.
