If you're new to all this, then I would recommend you consider the following...
NHibernate in Action (http://www.amazon.com/NHibernate-Action-Pierre- Henri-Kuat%C3%A9/dp/1932394923) makes a great read in re: understanding what's going on in using NHibernate. If you're not a book reader (and have about 20 hours of free time in which to learn <g>), I would also recommend you consider a series of screencasts I recorded some years ago intended to introduce people to a broad cross-section of NHibernate's features and usage: http://www.summerofnhibernate.com This series assumes no prior experience with NH and is probably a good place to start your learning (disclaimer: I am the author of this series so my opinion is probably somewhat biased but others have found them to be useful for them). HTH, -Steve B. On Aug 23, 1:34 pm, PLen <[email protected]> wrote: > Hello, > > I am new to C# / Visual Studio (2008) and also to nHibernate. I went > to thehttp://nhforge.org/site and found a Getting Started guide > (http://nhforge.org/wikis/howtonh/your-first-nhibernate-based- > application.aspx) which was billed as helping helping you create your > first nHibernate example. That example was very confusing because it > properly explain all the steps. It seemed to assume that you knew > they were talking about. Some items, such as the test project and the > "shared folder" were not explained as to how/where it was set up or > used. In any case, I can't find a simple example of setting up a > generic nHibernate test case to show how it works. > > Any help/guidnace woul dbe greatly appreciated - Peter -- You received this message because you are subscribed to the Google Groups "nhusers" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nhusers?hl=en.
