thanks Stan thats good to know. didn't know to pull them out and put them back 
in. 



----- Original Message ----
From: stanley/ Randolph <[EMAIL PROTECTED]>
To: [email protected]
Sent: Thursday, October 16, 2008 8:34:09 PM
Subject: [Nighthawk Lovers] Re: Bike Won't Start


  Fuses; well, I would pull them out and put them back in.  Sort of renews the 
electrical contact.  Not too much else to worry about, except the same goes for 
ground connections.  Disconnect, and/or unscrew, and reconnect, screw back in.  
If they look dirty, take a small brass brush and clean them off.  Hold them 
against a block of wood or something to avoid poking your fingers with the 
bristles...
 
Stanley



----- Original Message ----
From: Angela <[EMAIL PROTECTED]>
To: [email protected]
Sent: Thursday, October 16, 2008 3:00:10 AM
Subject: [Nighthawk Lovers] Re: Bike Won't Start


speaking of fuses, at what point should I worry about changing fuses on my 
bike?('93 750) do you just wait til there is a problem or what? Or is there a 
way to be proactive about these things. I think I looked inside the fuse block 
once in the year I've had the bike just to see where they were. And haven't 
thought about it since.
 
Angela



----- Original Message ----
From: J-Mart <[EMAIL PROTECTED]>
To: Nighthawk Motorcycle Lovers! <[email protected]>
Sent: Thursday, October 16, 2008 1:21:34 AM
Subject: [Nighthawk Lovers] Re: Bike Won't Start


Thanx!

On Oct 15, 6:20 pm, "Kyle Munz" <[EMAIL PROTECTED]> wrote:
> There's 2 bunches of wires coming off of the bottom of your ignition switch.
> A Red/Black pair, and a group of 2 browns, and one brown/white. These go to
> the top left corner of your fuse block which is below the headlight bucket
> and behind the horns. I had to take mine apart and clean it a while back and
> took plenty of pics. Don't be too surprised if the red/black plug is burnt a
> little bit where it plugs into the fuse block. See the link below.
>
> Fuse Blockhttp://munz.kicks-ass.net/nighthawk/?p=166
>
> -Kyle
>
> On Wed, Oct 15, 2008 at 6:05 PM, J-Mart <[EMAIL PROTECTED]>wrote:
>
>
>
> > Hey guys!
>
> > I have a 1983 650 Nighthawk.  This is my first bike.  I rode it one
> > day, and went to my apartment, stopped the bike, turned it off as
> > usual.  When I hopped on it to go somewhere (class (I'm at college)) I
> > noticed the headlight didn't come on when I turned the key for the
> > ignition.  I then noticed that it wouldn't start, where then I began
> > to curse very abruptly!  Anyway, I figured it was just the battery.  I
> > replaced the battery, and still nothing.  I checked the fuses,
> > everything was in order - including the 30 amp fuse near the battery.
> > I was thinking about changing the starter solenoid, but the guy at the
> > honda dealer said to check the ignition wires.  I'm at a loss for even
> > how to access this area.  This is where you guys come in!  I have no
> > idea on what to look for next.  If you guys could even send me some
> > pics that'd be awesome.
>
> > Thanx in advance!
>
> > Scott





--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to